i tried PBR to configured but it didnt work i am pasting the configs of
head/end tunnels routers, My tunnel is up now i am using PBR for reach a
tunnel destination.
Please check out the config and Help me to resolve the issue :) Thanks in
advance
R2
- |
- |
- |
R7 |
- |
- |
- |
R8
ON Router R8
interface FastEthernet0/0.78
encapsulation dot1Q 78
ip address 8.8.78.8 255.255.255.0
* ip policy route-map PBR*
mpls traffic-eng tunnels
mpls label protocol ldp
mpls ip
ip rsvp bandwidth 20000
end
interface Tunnel28
ip unnumbered Loopback1
mpls traffic-eng tunnels
tunnel destination 172.8.0.22
tunnel mode mpls traffic-eng
tunnel mpls traffic-eng path-option 1 explicit name T8-2
no clns route-cache
ip explicit-path name T2-8 enable
next-address 8.8.27.7
next-address 8.8.78.8
!
*access-list 10 permit 172.8.0.88*
*!*
*route-map PBR permit 10*
* match ip address 10*
* set interface Tunnel28*
* *
*!*
*route-map PBR permit 20*
!
on R2
interface FastEthernet0/0.27
encapsulation dot1Q 27
ip address 8.8.27.2 255.255.255.0
* ip policy route-map PBR*
ip ospf dead-interval 30
ip ospf priority 0
mpls label protocol ldp
mpls ip
mpls traffic-eng tunnels
ip rsvp bandwidth 20000
interface Tunnel28
ip unnumbered Loopback1
mpls traffic-eng tunnels
tunnel destination 172.8.0.88
tunnel mode mpls traffic-eng
tunnel mpls traffic-eng path-option 1 explicit name T2-8
a*ccess-list 10 permit 172.8.0.22*
*!!*
*
*
*route-map PBR permit 10*
* match ip address 10*
* set interface Tunnel28*
*!*
*route-map PBR permit 20*
tunnel status is UP UP
sh ip int bri
Tunnel28 172.8.0.22 YES TFTP up
up
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
