From: Kalsaria Prakash [mailto:[email protected]] Sent: Saturday, May 01, 2010 5:21 PM To: '[email protected]' Subject: Re: [OSL | CCIE_SP] CCIE_SP Digest, Vol 37, Issue 9 TE problemen Hello, RICK wood Thanks for going through problem My tunnels are working its UP UP Well I think while pasting a config into mail I would have done that mistake Explicit path name on both side are properly configured I think issue is related to PBR is that fine,,, ????? do I have to config anything on R7 for PBR Here are the debug Outputs ON R8 is a 7200 router and using IOS (C7200-K91P-M), Version 12.2(25)S14 Policy Routing(20), rtype 0, forus FALSE, sendself FALSE, mtu 0 03:38:41: IP: s=172.8.0.88 (local), d=172.8.0.22 (FastEthernet0/0.78), len 236, sending 03:38:41: IP: s=172.8.0.88 (local), d=172.8.0.22 (FastEthernet0/0.78), len 236, sending full packet R8(config-subif)#, Policy Routing(20), rtype 0, forus FALSE, sendself FALSE, mtu 0, Policy Routing(20), rtype 0, forus FALSE, sendself FALSE, mtu 0, Policy Routing(20), rtype 0, forus FALSE, sendself FALSE, mtu 0 R8(config-subif)#, Policy Routing(20), rtype 0, forus FALSE, sendself FALSE, mtu 0, Policy Routing(20), rtype 0, forus FALSE, sendself FALSE, mtu 0 on R2 ----- - - - 2600 Software (C2691-ADVENTERPRISEK9-M), Version 12.4(11)T1, *Mar 1 03:40:11.847: IP-CEF: process switch tunnel: Tunnel28->FastEthernet0/0.27 *Mar 1 03:40:26.223: IP: s=172.8.0.22 (local), d=172.8.0.88 (FastEthernet0/0.27), already routed *Mar 1 03:40:26.223: IP: s=172.8.0.22 (local), d=172.8.0.88 (FastEthernet0/0.27), len 224, sending *Mar 1 03:40:53.535: IP: s=172.8.0.22 (local), d=172.8.0.88 (FastEthernet0/0.27), already routed *Mar 1 03:40:53.535: IP: s=172.8.0.22 (local), d=172.8.0.88 (FastEthernet0/0.27), len 224, sending I didn't understand this debug output please help me out Thanks :)
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
