Yes it cames up . after Removing the both commands on R2/R8.
Thanks a Ton Mohammad Regards, Gaurav On Tue, Nov 2, 2010 at 1:55 PM, Muhammad Anser Khan <[email protected]>wrote: > No need for Internetworking type as both are same FR. > > It seems to me "frame-relay DCE type" issue. > > Please try to remove "no frame-relay intf-type dce" on both R2/R8 and > disable frame-relay switching. > > Regards, > Anser > > On Tue, Nov 2, 2010 at 11:18 AM, Prakash Kalsaria < > [email protected]> wrote: > >> From My Opinon >> Interworking ip statment >> in psudowire class is missing >> >> So try this one ... >> >> pseudowire-class L2TPV3 >> encapsulation l2tpv3 >> interworking ip >> ip local interface Loopback0 >> >> regards; >> Prakash Kalsaria >> http://prakashkalsaria.wordpress.com >> >> >> On Tue, Nov 2, 2010 at 12:38 PM, Gaurav Thukral <[email protected] >> >wrote: >> >> > Hi guys, >> > >> > I have the following diagram for L2TPv3 >> > >> > R4---------FR--------R8-----------------R2----------FR--------R3 >> > >> > R8 & R2 are PE and R4 & R3 are CE. >> > >> > I have done the following configuration on the devices. >> > >> > R8 & R2 >> > >> > pseudowire-class L2TPV3 >> > encapsulation l2tpv3 >> > ip local interface Loopback0 >> > >> > R4 >> > >> > interface Serial0/0 >> > ip address 5.5.34.4 255.255.255.0 >> > encapsulation frame-relay IETF >> > frame-relay map ip 5.5.34.3 408 broadcast >> > frame-relay lmi-type ansi >> > >> > R3 >> > >> > interface Serial0/0 >> > ip address 5.5.34.3 255.255.255.0 >> > encapsulation frame-relay IETF >> > frame-relay map ip 5.5.34.4 302 broadcast >> > frame-relay lmi-type ansi >> > >> > R8 >> > >> > frame-relay switching >> > >> > int s0/0 >> > encapsulation frame-relay IETF >> > frame-relay intf-type dce >> > frame-relay lmi-type ansi >> > frame-relay interface-dlci 804 switched >> > >> > >> > connect L2TP Serial0/0 804 l2transport >> > xconnect 5.5.2.2 28 pw-class L2TPV3 >> > >> > R2 >> > >> > frame-relay switching >> > >> > int s0/0 >> > encapsulation frame-relay IETF >> > frame-relay intf-type dce >> > frame-relay lmi-type ansi >> > frame-relay interface-dlci 203 switched >> > >> > connect L2TP Serial0/0 203 l2transport >> > xconnect 5.5.8.8 28 pw-class L2TPV3 >> > >> > The L2tpv3 is not comming Up & >> > >> > in sh ip int brief on the routes it is showing line protocol down. >> > >> > Please tell me where i have done the configuration mistake? >> > >> > Regards, >> > Gaurav >> > >> > >> > Blogs and organic groups at http://www.ccie.net >> > >> > _______________________________________________________________________ >> > Subscription information may be found at: >> > http://www.groupstudy.com/list/CCIELab.html >> >> >> Blogs and organic groups at http://www.ccie.net >> >> _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html >> >> >> >> >> >> >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
