Hi there I'd like to test isis over demand circuit -so I thought I'd run it via pppoe
But i'm getting the following error on the client side: *Feb 28 17:26:56.891: ISIS-Adj: Encapsulation failed on serial IIH (Dialer1) When I bring up the dialer interface with ping traffic the adjacency goes up -so it's not like isis won't ride through ppp But the interface doesn't stay up as the inactivity timer kicks in So the clns doesn't seem to be considered as interesting traffic even though it's permitted in the dialer-list Any thoughts what might be wrong here please? Thank you very much __________________________________________ CLIENT: interface FastEthernet0/0 no ip address duplex auto speed auto pppoe enable pppoe-client dial-pool-number 1 dial-on-demand ! interface Dialer1 ip address 12.0.0.1 255.255.255.0 ip router isis encapsulation ppp dialer pool 1 dialer idle-timeout dialer-group 1 ! access-list 100 permit icmp host 12.0.0.1 host 12.0.0.2 dialer-list 1 protocol ip list 100 dialer-list 1 protocol clns permit __________________________________________ ACCESS CONCENTRATOR: bba-group pppoe GROUP-12 virtual-template 12 ! ! interface FastEthernet0/0 no ip address duplex auto speed auto pppoe enable group GROUP-12 ! interface Virtual-Template12 ip address 12.0.0.2 255.255.255.0 ip router isis ! adam
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
