I would rely on the "show clns interface" to identify the DIS.
Regards, Antonio Soares, CCIE #18473 (R&S/SP) [email protected] http://www.ccie18473.net -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Malik Nouman Ahmad Sent: quinta-feira, 10 de Março de 2011 23:25 To: Cisco certification; [email protected] Subject: DIS Identification in ISIS Hi, It is said that "show isis database" can be used to identify DIS. Following is the output: IS-IS Level-1 Link State Database: LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL R6.00-00 0x0000000C 0x5962 922 0/0/0 R6.01-00 0x00000001 0x092A 923 0/0/0 R9.00-00 * 0x0000000D 0xFCAC 929 0/0/0 R9.03-00 * 0x00000001 0xA150 0 (94) 0/0/0 Now now is 01-00 always DIS or is it the highest non-zero value (i.e. 03-00 in this case)? Also to disable DIS election on a link is "isis network point-to-point" enough? Thanks, Malik Blogs and organic groups at http://www.ccie.net _______________________________________________________________________ Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
