Use two dial-peers, set g711ulaw hard codec and max-conn of 1, the set 2nd dial-peer with higher preference and hard code codec to g729
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Devildoc Sent: Saturday, February 16, 2008 10:51 AM To: CCIE Voice Online Study List Subject: [OSL | CCIE_Voice] Bandwidth Update with GK Hello, I know in CM, to update bandwidth automatically when calls are going through a gk, you'll have to modify the BRQ service parameter to true. Does anyone know if there is an IOS command that does the same thing for an H323 gateway? Or if there is an IOS command that resets the bandwidth allocation on a gk as soon as the call is terminated? The reason being is that I experienced some codec selection issues with calls from an H323 gateway to CM via a gk when i used a voice codec class to prefer one codec type over another. My prference in a codec class is to use g711 first and g729 as a second choice. The interzone bandwidth is restricted to 144 (which is enough for 1 g711 and 1 g729 calls). Sometime a call would use codec g711 first (which is correct), and another time it would use codec g729 first (which is not preferred) even though there is only one active call. Any info is greately appreciated. Thank you! JD ________________________________ Climb to the top of the charts! Play the word scramble challenge with star power. Play now! <http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_ jan> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information of Cameron and its Operating Divisions. Any unauthorized use or disclosure is prohibited. If you are not the intended recipient, please contact the sender by reply email and delete and destroy all copies of the original message inclusive of any attachments. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
