Hi Ovais and Jason, thanks for the reply on this. On CCM I already checked the'"Redirecting Number IE Delivery - Inbound'' checkbox on the (incoming) HQ gateway. You can also see the Called Party Number and the RedirectingNumber that comes into CCM from the trace below - but Unity's Call Viewer doesn't show the correct ''dialed number'' though... Ovais, the VM-Integration, is that supported for PRI calls? I thought it only worked for analog - or T1 CAS/E1 r2 - line's - but I can be wrong of course? Kind regards, Juan
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ovais Iqbal Sent: Saturday, February 16, 2008 4:47 AM To: jason sung Cc: [email protected]; Juan Lopez Hernandez -X (jlopezhe - IBM - INS at Cisco) Subject: Re: [OSL | CCIE_Voice] called number in Unity's Call Viewer mimicsForwarding number by the way my understanding is that in the real LAB the RDNIS does not work today - you would need VM-Integration option to be configured to get it work properly in your real lab. I know at home I made it to work with redirected number option. On 2/15/08, jason sung <[EMAIL PROTECTED]> wrote: Juan, You may have already done this, Is the RDNIS box checked on the HQ PRI? On Feb 15, 2008 2:28 PM, Juan Lopez Hernandez -X (jlopezhe - IBM - INS at Cisco) <[EMAIL PROTECTED]> wrote: Hello, I need some help as I can't figure out the following: I try to test Unity with BR1 in SRST. All is going fine, the call to unity is set up over PSTN, redirecting number works fine. From the CCM trace files I see the call coming in as: SETUP pd = 8 callref = 0x00AB Bearer Capability i = 0x8090A3 Channel ID i = 0xA98381 Calling Party Number i = '!', 0x80, '6175252001' Called Party Number i = 0x80, '2122251600' <------- 4 last digits are the Unity pilot number - this incoming number gets stripped to ''1600'' Redirecting Number i = 0x000082, '6175252002' When looking into Unity's Call Viewer, I notice that the ''dialed number'' always follows the ''forwarding number''. So instead of seeing the number 1600 as dialed number in the Call Viewer , I see whatever is the forwarding number. Is there a setting that can be changed so you see the correct ''dialed number''? Kind regards, Juan -- Ovais Iqbal 416-294-7869
