I believe vm-integration is required in any case where RDNIS doesn't work.
-matt
ccievoice1 wrote:
Hi Vik,
Can I assume during "*normal*" srst failover, vm-integration is not
required. However, due to IOS bug for a certain IOS version,
vm-integration is required. Am I right to say that?
Thanks.
On Wed, Feb 20, 2008 at 1:19 PM, anil batra <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
yes that's correct..1599 is Hunt Pilot
--- Vik Malhi <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>
wrote:
> I assume- 1599 is your hunt pilot to voicemail.
>
> The vm-integration command only takes effect when
> the call-forward # = the
> voicemail #.
>
> So add this command:
>
> Call-manager-fallback
> voicemail 12122241599
>
> Vik
>
>
> Vik Malhi - CCIE #13890, CCSI #31584
> Sr Technical Instructor - IPexpert, Inc.
> A Cisco Learning Partner - We Accept Learning
> Credits!
> Telephone: +1.810.326.1444
> Fax: +1.810.454.0130
> Mailto: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
>
> IPexpert - The Global Leader in Self-Study,
> Classroom-Based, Video-On-Demand
> and Audio Certification Training Tools for the Cisco
> CCIE R&S Lab, CCIE
> Security Lab, CCIE Service Provider Lab , CCIE Voice
> Lab and CCIE Storage
> Lab Certifications.
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
> [mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>] On
> Behalf Of anil batra
> Sent: Tuesday, February 19, 2008 8:41 PM
> To: [email protected]
<mailto:[email protected]>
> Subject: [OSL | CCIE_Voice] VM in SRST mode
>
> Hi Vik
>
> I am folllowing the configs for VM in SRST.
>
> I used VM integration but still it goes to Unity
> pening greeting instead of
> the greeting for 2001.
> Under noraml it hits VM of 2001.
>
> Here is the debug and config on Br1 -
>
> P24-BR1-RTR#
> .Feb 20 04:50:30.397: ISDN Se0/0/0:23 Q931: RX <-
> SETUP pd = 8 callref =
> 0x0097
> Bearer Capability i = 0x8090A2
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA98381
> Exclusive, Channel 1
> Calling Party Number i = 0x2181,
> '2122241004'
> Plan:ISDN, Type:National
> Called Party Number i = 0xA1, '6175242001'
> Plan:ISDN, Type:National .Feb 20
> 04:50:30.413: ISDN
> Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref =
> 0x8097
> Channel ID i = 0xA98381
> Exclusive, Channel 1
> P24-BR1-RTR#
> .Feb 20 04:50:30.425: ISDN Se0/0/0:23 Q931: TX ->
> ALERTING pd = 8 callref =
> 0x8097
> Progress Ind i = 0x8188 - In-band info or
> appropriate now available
> P24-BR1-RTR# .Feb 20 04:50:36.421: ISDN Se0/0/0:23
> Q931: Applying typeplan
> for sw-type 0xD is 0x2 0x1, Calling num
> 2122241004
> .Feb 20 04:50:36.425: ISDN Se0/0/0:23 Q931: Applying
> typeplan for sw-type
> 0xD is 0x2 0x1, Called num
> 12122241599
> .Feb 20 04:50:36.425: ISDN Se0/0/0:23 Q931: TX ->
> SETUP pd = 8 callref =
> 0x0084
> Bearer Capability i = 0x8090A2
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA98383
> Exclusive, Channel 3
> Calling Party Number i = 0x2181,
> '2122241004'
> Plan:ISDN, Type:National
> Called Party Number i = 0xA1, '12122241599'
> Plan:ISDN, Type:National
> Redirecting Number i = 0xFF, '2001'
> Plan:Reserved, Type:Reserved .Feb 20
> 04:50:36.457: ISDN
> Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref =
> 0x8084
> Channel ID i = 0xA98383
> Exclusive, Channel 3
> .Feb 20 04:50:36.493: ISDN Se0/0/0:23 Q931: RX <-
> ALERTING pd = 8 callref =
> 0x8084
> Progress Ind i = 0x8088 - In-band inf
> P24-BR1-RTR#o or appropriate
> now available .Feb 20 04:50:36.693: ISDN Se0/0/0:23
> Q931: RX <- CONNECT pd =
> 8 callref = 0x8084
> Display i = 'Voicemail'
> .Feb 20 04:50:36.697: %ISDN-6-CONNECT: Interface
> Serial0/0/0:2 is now connected to 12122241599 N/A
> .Feb 20 04:50:36.697: ISDN
> Se0/0/0:23 Q931: TX -> CONNECT_ACK pd = 8 callref =
> 0x0084 .Feb 20
> 04:50:36.705: ISDN Se0/0/0:23 Q931: TX -> CONNECT pd
> = 8 callref = 0x8097
> .Feb 20 04:50:36.713: ISDN Se0/0/0:23 Q931: RX <-
> CONNECT_ACK pd = 8
> callref = 0x0097 .Feb 20 04:50:36.717:
> %ISDN-6-CONNECT: Interface
> Serial0/0/0:0 is now connected to 2122241004 N/A
> P24-BR1-RTR# .Feb 20
> 04:50:40.940: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT
> pd = 8 callref =
> 0x0097
> Cause i = 0x8290 - Normal call clearing .Feb
> 20 04:50:40.944:
> %ISDN-6-DISCONNECT: Interface Serial0/0/0:0
> disconnected from 2122241004 ,
> call lasted 4 seconds .Feb 20 04:50:40.944: ISDN
> Se0/0/0:23 Q931: TX ->
> RELEASE pd = 8 callref = 0x8097 .Feb 20
> 04:50:40.952: %ISDN-6-DISCONNECT:
> Interface
> Serial0/0/0:2 disconnected from 12122241599 , call
> lasted 4 seconds
> P24-BR1-RTR# .Feb 20 04:50:40.952: ISDN Se0/0/0:23
> Q931: TX -> DISCONNECT pd
> = 8 callref = 0x0084
> Cause i = 0x8290 - Normal call clearing .Feb
> 20 04:50:40.956: ISDN
> Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 callref
> = 0x0097 .Feb 20
> 04:50:40.964: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd
> = 8 callref = 0x8084
> .Feb 20 04:50:40.968: ISDN Se0/0/0:23 Q931: TX ->
> RELEASE_COMP pd = 8
> callref = 0x0084 P24-BR1-RTR#
>
> >>>>>>>>>>>>>>
>
>
> br1 config >>>
>
>
> P24-BR1-RTR#sh ru
> % Ambiguous command: "sh ru"
> P24-BR1-RTR#sh run
> Building configuration...
>
> Current configuration : 4451 bytes
> !
> ! Last configuration change at 23:00:20 CST Tue Feb
> 19
> 2008
> ! NVRAM config last updated at 22:33:35 CST Tue Feb
> 19
> 2008
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname P24-BR1-RTR
> !
> boot-start-marker
> boot system
> flash:c2800nm-adventerprisek9_ivs-mz.124-3g.bin
> boot-end-marker
> !
> !
> no aaa new-model
> !
> resource policy
> !
> clock timezone CST -6
> network-clock-participate wic 0
> network-clock-select 1 T1 0/0/0
> ip subnet-zero
> !
> !
> ip cef
>
=== message truncated ===
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
