It wouldn't work - Multicast doesn't allow transcoders.
Are you in SRST fallback when you are stating that you are in H323?
Also I assume this is MoH to the PSTN PRI Trunk - since IP phones
speak SCCP not MGCP or H323 - am I correct on that assumption?
Anyway - next test you would need to do is to run PerfMon on the
(correct) UCM (so most likely MoH server is registered to the Sub CPE
if you are using the Sub) and check to see when the music starts -
does the MoH PerfMon counter show that the music is coming from the
Sub or Pub as either a Multicast or Unicast stream ... if not - you
have other things afoot!
Cheers,
--
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: [EMAIL PROTECTED]
--
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
--
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
CCIE Storage Lab Certifications.
--
On Apr 2, 2008, at 7:59 PM, jason sung wrote:
Ok, I eliminated the 1st option by only allowing g711. (removed g729
under ip streaming services)
2nd option you mention. How would that happen?
On Wed, Apr 2, 2008 at 6:57 PM, Jonathan Charles <[EMAIL PROTECTED]>
wrote:
And we know from Mark Snow that the region setting only says 'this is
the MAXIMUM bandwidth' we can use, so if it set to G.711, then G.729
is still available for use.
If you want it to use G.711 for MoH disable G.729 under the IP Voice
Media Streaming App Service Parameter
Or.
Your H.323 destination is forcing G.729 so it is being transcoded...
one of those...
Jonathan
On undefined, jason sung <[EMAIL PROTECTED]> wrote:
> I have a small problem.
>
> My multicast MOH works fine at the Remote site using MGCP, but
fails to use
> g711 at remote site when I use H323.
>
> CallManager configurations stay the same. When I switch from H323
to MGCP
> everything works fine, if I switch back to H323, MOH works only
for g729 and
> not g711.
>
> For g711 I created MOH server device pool such that it will talk
only g711
> with remote site.
>
> any ideas??
