Yeah, as I thought: "Reevaluation of Results
If you are concerned your results are in error, you may request a "reread" until 14 days after your lab date via an email to [EMAIL PROTECTED] Each reread costs $250.00 USD and consists of a proctor loading your configurations into a rack to recreate the test and re-score the entire exam. This process may take up to three weeks after receipt of payment" Jonathan On Sat, Apr 5, 2008 at 1:04 PM, Jonathan Charles <[EMAIL PROTECTED]> wrote: > There is a rescore option... isn't there? There was for the R&S... > > > Jonathan > > > > On Sat, Apr 5, 2008 at 12:57 PM, Scott Monasmith <[EMAIL PROTECTED]> wrote: > > Devildoc, I do feel your frustration. I finished my last attempt in a > little > > over 5 hours and spent the next 3 hours verifying my work. I walked out of > > the exam feeling like I nailed it. However, based on my score report, it > > reflected a score of about 74-76 points. There were 3 sections where the > > score came out and I was left scratching my head thinking "how can this > be?" > > - Talk about deflating. I had plenty of time to verify everthing and I felt > > very good about my chances. And to this day I still have no idea how I > could > > have missed points on those sections. > > > > To me, there are 2 things we can do: > > 1. study harder > > 2. after each failed attempt, continue to stress to cisco (via the critique > > in your score report) that a re-score option needs to be established for > the > > exam. > > > > If I'm spending $2,000 (exam + travel) for each attempt, the least they can > > do is reassure us that they are doing everything possible to ensure that > > there are no errors in the grading. > > > > BTW, a proctor told me that voice is the most challenging to grade since > > there is more than one way to achieve the desired results > > > > > > > > > > On 4/5/08, Jonathan Charles <[EMAIL PROTECTED]> wrote: > > > I ran into the same problem with the R&S lab... there might be 3 or 4 > > > ways to do something, but only one of them gets you points... not sure > > > if this is the same thing on the CCIE Voice lab... but I would bet it > > > is. > > > > > > No idea on how they grade the test. > > > > > > But I think a lot has to do with how you use the proctor... so, if > > > there are 2 ways to do something, that means to go to the proctor and > > > say, 'hey, I have way A and way B... which one is preferred?' > > > > > > Now, I would bet that one of those ways doesn't meet the > > > requirements... which is why this test is as difficult as it is... > > > because you are going to have to know why 'way B' doesn't work... > > > which means a deep understanding of not just how to configure > > > something, but in the way it works at a protocol level. > > > > > > For example... let's say I wanted you to set up CAC for a specific > > > location. Now, no big, right, just set up locations-based CAC... or > > > use the GK... both work... both will provide CAC... but let's say I > > > added to that, 'make sure that you can adjust bandwidth on the fly...' > > > now, we know locations-based CAC can't do that, we are looking for > > > BRQs and we have to use a GK and enable BRQs in CCM. > > > > > > The example is probably a bad one, but it is the only one I can think of. > > > > > > I do have a question tho... I have heard from people that the CCMs are > > > slow and nearly unresponsive... so, it can take 2 or 3 minutes for a > > > page to load. Is this true? Whee did you take it? > > > > > > Also, Mark Snow has an example script on the DVDs, that looks like it > > > would take a few hrs to configure on the lab... even if you knew > > > scripting... the requirements seem straightforward, but then he adds > > > extra steps to the script... that seem to be from IPCC Scripting Best > > > Practices... and all for probably only 4 points on the test... it > > > seems like it would be almost impossible to get any points from that > > > scenario... > > > > > > > > > > > > > > > Jonathan > > > > > > > > > > > > > > > > > > On Sat, Apr 5, 2008 at 10:45 AM, Devildoc <[EMAIL PROTECTED]> wrote: > > > > > > > > Hello All, > > > > > > > > I just had my first attempt at the Voice CCIE lab last week, and of > > course, > > > > i failed. I knew right away after the lab that i failed. The reason > > why I > > > > failed was not due to the lack of or inadequate amount of knowledge > that > > I > > > > possessed but rather the lack of time. I was so nervous and stressed > out > > > > that I tumbled clumsily throughout the day. > > > > > > > > In my opinion, the lab was not tricky or even difficult. I actually > > think > > > > that i over-studied for the lab. The Proctor Workbook and the Bootcamp > > well > > > > prepared me for the lab, so there was no problem with the knowledge > > there. > > > > Having said that, i was dumbfounded when i got my scores result. > > > > > > > > And here are my questions. Does anyone know how Cisco grade these > > labs? > > > > Is Cisco looking for a specific way to implement a solution or any > > method to > > > > implement a solution would work as long as it satifies all of the > > > > requirements asked of you in the questions? > > > > > > > > The reason why i am asking these questions is because even though i > did > > not > > > > complete the lab, I did complete some sections. I tested those > > completed > > > > sections and verified that all requirements were met, and still i > > received > > > > 0% for those completed sections. Shouldn't I have received some points > > for > > > > those sections? I know that each question is worth ALL or NO point for > > the > > > > correct answer. However, there are many questions in a section, and if > > I > > > > completed a section with all requirements met, then i would think that > > at > > > > least i would get 1 or 2 questions right if not all. But i see no > point > > > > awarded at all for the completed sections, so that means that i must > not > > > > have gotten all questions in the section right to get 0%. But how can > > that > > > > be since I tested it and verified that all requirements were met and > > that > > > > the solutions that i implemented were working. This only means that my > > > > implemented methods were not what Cisco was looking for. > > > > > > > > Does anyone have the similar experience or is it just me? > > > > > > > > JD > > > > > > > > > > > > > > > > ________________________________ > > > > Pack up or back up–use SkyDrive to transfer files or keep extra copies. > > > > Learn how. > > > > > > > > > > > -- > > "There are only 10 types of people in the world: Those who understand > > binary, and those who don't" >
