Thats really helps :-)
thanks JD
Devildoc <[EMAIL PROTECTED]> wrote: .hmmessage P { margin:0px; padding:0px }
body.hmmessage { FONT-SIZE: 10pt; FONT-FAMILY:Tahoma } Think of the cor list
this way. Any cor list that is in the outgoing direction is analogous to the
CCM partition, and any cor list that is in the incoming
direction is analogous to the CCM CSS.
So to restrict any phone from the PSTN side from calling into CME phone 2,
then you'll need to place phone 2 in an outgoing corlist (partition) that is
not a member of the incoming corlist (CSS) of the incoming pot dialpeer.
In the configuration below, I place phone 2 in an outgoing corlist (partition)
of INTERNAL and I placed the incoming dialpeer pots 1 in the incoming corlist
(CSS) of ALL. The ALL incoming corlist does not have the member internal.
Therefore, when an incoming call from PSTN arrives at dialpeer 1
for extension 2002, the call would fail because extension 2002 belongs to a
corlist member that the dialpeer 1 does not have access.
dial-peer cor custom
name 911
name local
name ld
name international
name internal
dial-peer cor list INTERNAL
member internal
dial-peer cor list ALL
member 911
member local
member ld
member international
dial-peer voice 1 pots
corlist incoming ALL
incoming called-number .
direct-inward-dial
port 0/0/0:0
ephone-dn 2 dual-line
number 2002
corlist outgoing INTERNAL
In the case of SRST, you don't have the option to specify the ephone-dn, then
you must use the following configuration (keep the rest of the above
configuration the same except for the ephone-dn):
call-manager-fallback
cor outgoing internal 1 2002
Hope that helps.
JD
---------------------------------
Date: Sat, 19 Apr 2008 12:51:14 +0900
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [email protected]
Subject: Re: [OSL | CCIE_Voice] SRST call restriction labbook 8.9
thanks Ed, i still couldn't get it.
there is an dial-peer 2 with incoming cor list applied
dial-peer voice 2 pots
corlist incoming css-911
incoming called number .
direct-inward-dial
dial-peer css-intl
member pt-internal
dial-peer css-911
member pt-911
Sara
Edward French <[EMAIL PROTECTED]> wrote: .ExternalClass DIV {;} The cor
out is what is restricting calling to 2002 you will probably notice that the
dail-peers do not have a cor incomming.
Ed
----- Original Message ----
From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
To: [email protected]
Sent: Friday, April 18, 2008 9:10:24 PM
Subject: [OSL | CCIE_Voice] SRST call restriction labbook 8.9
in the lab book 8.9 there is a requirement to configure cor so that no pstn
caller to call 2002 in srst mode.
the config given is:
cor incoming css-911 1 2002-2003
cor incoming css-all 2 2002
cor outgoing css-intl 3 2002
i am weak on this, can some one explain how is the requirement achieved?
Sara
---------------------------------
GANBARE! NIPPON! Win your ticket to Olympic Games 2008.
---------------------------------
GANBARE! NIPPON! Win your ticket to Olympic Games 2008.
---------------------------------
Get in touch in an instant. Get Windows Live Messenger now.
---------------------------------
GANBARE! NIPPON! Win your ticket to Olympic Games 2008.
