For an ESW Port with IPPhone+PC, It should be something like this: inter fastethernet 1/0 switchport trunk encapsulation dot1q switchport mode trunk switchport trunk native vlan 100 <<<<< Data Vlan switchport voice vlan 200 <<<<<< Voice Vlan
-----Original Message----- From: [EMAIL PROTECTED] on behalf of Suresh Velayudhan Sent: Sat 4/26/2008 5:59 PM To: [email protected] Subject: [OSL | CCIE_Voice] how should the phone ports be configured on theES-SW module.. I am trying to configure the HWIC-9-ESSW module for connecting to the IP phones. For normal switch ports this should be configured as an access port. I am can get the phones to register when configured as an access port, it works fine when configured as a trunk port. Want to make sure if trunk is the right configuration. Thanks Suresh
