Hello Ovais, I just checked your config.
What I see is that you are missing some parameters in the service ,at least for the moment I see the "param voicemail" missing in the aa service, If you don't configure it the service doesn't work. I recommend you to copy&paste the example config in the readme file located in the flash, and try to use all the parameters in that example. De: ovais Iqbal [mailto:[EMAIL PROTECTED] Enviado el: 27 May 2008 11:12 Para: Christian Narvaez Asunto: Re: [OSL | CCIE_Voice] B-ACD call fails Hi Christian, Thanks for assisting, the config is attached. There may be some dial-peer mess in here but I tried to look as much as possible. You will see Incoming Called Number as well as Destination-Pattern command for service aa dial-peer, I have tried with either or but could not get it to work. Thanks Ovais. On 5/27/08, Christian Narvaez <[EMAIL PROTECTED]> wrote: HI Ovais, Plase send your configuration, De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de ovais Iqbal Enviado el: 27 May 2008 10:14 Para: OSL CCIE Voice Lab Exam Asunto: [OSL | CCIE_Voice] B-ACD call fails Hi Group, I have tried to configure B-ACD based on IpExpert workbook task # 14.9 but it seems that I always have issues with B-ACD, this time when I call from the PSTN phone, it connects but right away gets disconnect. Any idea what could be going on? I am using IOS 12.4(5b) IpVoice and CME 3.3 and TCL 2.1.0.0 <http://2.1.0.0/> . Thanks -- Ovais Iqbal 416-294-7869 -- Ovais Iqbal 416-294-7869
