Hi Scott If you are using IPIPGW, try configure the H225 Trunk in the CCM with the following
- Media Termination Point Required : Checked - Retry Video Call as Audio : Checked - Wait for Far End H.245 Terminal Capability Set : Uncheked Also, ensure you have disabled the proxy in the gatekeeper configuration with: No use-proxy ATA-GK default inbound-to-terminal No use-proxy ATA-GK default outbound-from-terminal De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Hardesty, Scott Enviado el: 28 May 2008 08:05 Para: [email protected] Asunto: [OSL | CCIE_Voice] Help on IPExpert Lab5 I am working on lab 5 of the IPExpert workbook and I can not seem to get audio to cut through when initiating a call from an HQ IP Phone to the ATA. The ATA is registered as a terminal to the GK. When calling from the HQ phone, the ATA rings and when answered, ringback stops on the IP phone so signaling seems to be working properly but the audio path never gets established. Any guidance on this would be appreciated. Thanks. ........................................................................ ........................................................................ ..... Scott Hardesty | Presidio Networked Solutions | E-mail [EMAIL PROTECTED] | Voice: 443-789-1219
