[OSL | CCIE_Voice] Sending 10-digits on an E1 R2?

[Jonathan Charles]

Calling from BR2 to BR1, I am only seeing 4-digits sent... here is the
config of the E1:

!
!
controller E1 0/0/0
 ds0-group 1 timeslots 1-3 type r2-digital r2-semi-compelled ani
 cas-custom 1
  dnis-digits min 10 max 10
  ani-digits min 10 max 10

and the ephone I am calling from...


!
ephone-dn  5  dual-line
 number 3003 no-reg primary
 description 3313233003
 preference 2
 call-forward busy 3600
 call-forward noan 3600 timeout 10
 corlist incoming phone2


!
!
ephone  3
 username "Thing" password cisco
 mac-address 0004.9A3C.7800
 button  1:5
!

On BR1 here is what I see...

P3-BR1-RTR(config)#
*Sep  5 18:24:47.858: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8  callref =
0x0005
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98381
                Exclusive, Channel 1
        Progress Ind i = 0x8583 - Origination address is non-ISDN
        Calling Party Number i = 0x0080, '3003'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0xA1, '6175232002'
                Plan:ISDN, Type:National
*Sep  5 18:24:47.910: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8  callref
= 0x8005
        Channel ID i = 0xA98381
                Exclusive, Channel 1
*Sep  5 18:24:47.914: ISDN Se0/0/0:23 Q931: TX -> ALERTING pd = 8  callref =
0x8005
        Progress Ind i = 0x8088 - In-band info or appropriate now available
P3-BR1-RTR(config)#
P3-BR1-RTR(config)#
P3-BR1-RTR(config)#
P3-BR1-RTR(config)#



Any ideas?



Jonathan