Reset the Huntlist the VM ports belong to. I will bet you it is not reg.

 

Cheers!

 

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of jeremy co
Sent: Wednesday, October 29, 2008 3:06 PM
To: CCIE Voice Maillist
Subject: Re: [OSL | CCIE_Voice] Simple Problem: phone calls does
notforwarded to unity

 


Well, I can verify it on unity, and it passes all of 4 ports
successfully. (btw, I can make it work only when I change port of ccm on
unity integration wizard to 2002 !!!) ,I donnow yet why by 2000 it was
not integrate to ccm. I didn't change any default ports on ccm .

on ccm after resetting ports, I still see "Not found"


Jeremy

On Thu, Oct 30, 2008 at 5:52 AM, Chris Parker <[EMAIL PROTECTED]>
wrote:

It sounds like unity is not registering its ports with the callmanager.
On the Unity server, go into the Telephony Integration under system
tools and test your integration. If that fails make sure the port names
in unity match what you have set on callmanager. Try restarting Unity
too.


jeremy co wrote:

Hi,

Jacob I did the firs two. but I'm not sure what u mean by registering vm
ports.

on unity I can verify ,call manager integration, and on ccm on "voice
mail ports",I can see "not found" status.

When I hit message button, I hear fast busy tone.

When I dial pilot number ,also hear fast busy signal. I think CCM not
forward call to unity

btw, every thing is in none partition, no CSS.



Jeremy



On Thu, Oct 30, 2008 at 5:12 AM, Chris Parker <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:

   What happens when you dial you voicemail pilot? Does the call ring
   through? Are phones able to access voicemail via the messages key?

   If the answers to the above are yes, then I would look at possible
   codec or CAC problems. For example is the call rinnging into the
   phone 729, then trying to go 711 when it goes to Unity? If so you
   may need to check your transcoder.


   jeremy co wrote:

       Hi,


       I integrate CCM to unity and define 4 ports on both unity and
       ccm.Then, check DN's options on Phones to forward unanswered
       calls to voice mail. Subscribers are created with extention of
       3001 and 3007 and set active schedule to "all houres- alldays"

       I have 2 IPphones with DN's of 3001 and 3007.

       When I call another ip phone and one does not answer the call,
       I hear fast busy tone and nothing is forwarded to voice mail.

       Am I miss anything?

       Jeremy




 

 


 
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD  20770 | mailto:[EMAIL PROTECTED]
D: 571.225.0132 | http://www.presidio.com/

 

Reply via email to