Ryan Make sure that frame-relay traffic shape is apply to the phisical interface. Cheers Sergio MSN [email protected]
----- Mensagem Original ----- De: Ryan Trauernicht <[email protected]> Enviada: terça-feira, 6 de janeiro de 2009 14:50 Para: [email protected] Cc: [email protected] Assunto: Re: [OSL | CCIE_Voice] Show policy map stats when using FRF12 Sergio, I thought I saw the output for the policy-map when I did a "show frame-relay pvc 101" but now all i see if DLCI info. I dont see the stats under it anymore.. I made sure my service-policy is applied to the map-class and still nothing. Thanks, Ryan Trauernicht On Sun, Jan 4, 2009 at 3:17 PM, Ryan Trauernicht <[email protected]> wrote: Sergio.... thank you very much... not sure how I missed that. Thanks, Ryan Trauernicht On Sun, Jan 4, 2009 at 3:09 PM, Sergio Polizer <[email protected]> wrote: Ryan You can use show frame pvc <dlci> Cheers Sergio ----- Mensagem Original ----- De: Ryan Trauernicht <[email protected]> Enviada: domingo, 4 de janeiro de 2009 17:22 Para: [email protected] Assunto: [OSL | CCIE_Voice] Show policy map stats when using FRF12 What command can I use to show a service-policy stats when it is tied to a Frame-relay class-map. "Show service-policy int" does not show it when FRF.12 is configured below. class-map match-any RTP match ip dscp ef class-map match-any SCCP match ip dscp cs3 match ip dscp af31 policy-map toHQ class RTP priority 112 class SCCP set ip dscp cs3 bandwidth 20 class class-default fair-queue interface 0/0 bandwidth 384 ip address X.X.X.X 255.255.255.0 encap frame-relay frame-relay traffic-shaping frame-relay interface-dlci 100 class FR_toHQ class frame-relay FR_toHQ frame-relay mincir XXXX frame-relay cir XXXX frame-relay bc XXXX frame-relay be 0 frame-relay fragment XXXX service-policy output toHQ show service-policy interface comes back blank. I want to see what is matching on each class-map but I can not find the command. Thanks, Ryan Trauernicht
