Check your dhcp default-router, I believe that it should be
10.21.202.1 (same subnet as your cme phones)
On Apr 7, 2009, at 10:01 AM, Arshad Dhunna <[email protected]>
wrote:
Required help my cme phones are not getting registered.
Here is the CME config
astEthernet0/0.310 unassigned YES manual
up up
astEthernet0/0.410 10.21.202.1 YES manual
up up
ip dhcp excluded-address 10.21.202.1 10.21.202.49
ip dhcp excluded-address 10.21.202.70 10.21.202.254
!
ip dhcp pool ITS
network 10.21.202.0 255.255.255.0
option 150 ip 172.21.102.1
default-router 172.21.102.1
!
interface FastEthernet0/0.310
encapsulation dot1Q 310 native
no snmp trap link-status
!
interface FastEthernet0/0.410
encapsulation dot1Q 410
ip address 10.21.202.1 255.255.255.0
no snmp trap link-status
!
Switch conf
interface FastEthernet0/1
switchport trunk encapsulation dot1q
switchport trunk native vlan 310
switchport mode trunk
interface FastEthernet0/23
switchport trunk encapsulation dot1q
switchport trunk native vlan 310
switchport mode trunk
switchport voice vlan 410
spanning-tree portfast
!
interface FastEthernet0/24
switchport trunk encapsulation dot1q
switchport trunk native vlan 310
switchport mode trunk
switchport voice vlan 410
spanning-tree portfast
vlan database
vlan 310
vlan 410
apply
Can anyone reply me where is the issue.
ip source-address 172.21.102.1 port 2000
load 7910 P00403020214
load 7960-7940 P00307020200
max-ephones 10
max-dn 10
max-conferences 8 gain -6
dspfarm units 1
dspfarm transcode sessions 2
dspfarm 1 transcode
hunt-group report delay 1 hours
max-redirect 5
time-format 12
date-format mm-dd-yy
timezone 0 Greenwich Standard Time
secondary-dialtone 9
call-forward pattern .T
Did you know? You can CHAT without downloading messenger. Click here
