Hi,
I am running SRST with H323. My phones are registered to SRST GW.
When a call comes to one of the registered phone (3002), on no answer,
the call is forwarded to voice mail. I am having the workaround
configured for incorrect ISDN cause for redirecting number. The call
is going to unity with original redirecting call as ' 3002' instead of
‘3002’. I am not sure there this extra character is prefixed. I tried
playing with RDNIS configs on the GW and didn’t get it worked.
Could someone tell me how to fix this problem.
Thanks,
Prabahar
SRST GW Config:
BR1#sh run | begin call-manager-fallback
call-manager-fallback
secondary-dialtone 9
max-conferences 1 gain -6
transfer-system full-consult
ip source-address 192.168.12.1 port 2000
max-ephones 10
max-dn 10 dual-line
sdspfarm units 4
sdspfarm transcode sessions 2
transfer-pattern .T
default-destination 2600
voicemail 2600
alias 1 2001 to 2002 preference 2 cfw 2600 timeout 3
call-forward pattern .T
call-forward busy 2600
call-forward noan 2600 timeout 12
moh flash:music-on-hold.au
multicast moh 239.215.1.1 port 16384 route 192.168.12.1
time-zone 8
date-format dd-mm-yy
cor incoming keys-all default
!
!
vm-integration
pattern ext-to-ext no-answer * FDN
pattern ext-to-ext busy * FDN
pattern trunk-to-ext no-answer * FDN
pattern trunk-to-ext busy * FDN
!
BR1#debug isdn q931
debug isdn q931 is ON.
BR1#
.Apr 10 19:26:21.844: ISDN Se2/1:23 Q931: RX <- SETUP pd = 8 callref = 0x0240
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x2180, '911'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '3002'
Plan:ISDN, Type:National
.Apr 10 19:26:21.856: ISDN Se2/1:23 Q931: TX -> CALL_PROC pd = 8
callref = 0x8240
Channel ID i = 0xA98381
Exclusive, Channel 1
.Apr 10 19:26:21.860: ISDN Se2/1:23 Q931: TX -> ALERTING pd = 8
callref = 0x8240
BR1#
BR1#
.Apr 10 19:26:28.249: %FAN-3-FAN_FAILED: Fans had a rotation error reported.
.Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: Applying typeplan for
sw-type 0x2 is 0x2 0x1, Calling num 911
.Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: Applying typeplan for
sw-type 0x2 is 0x2 0x1, Called num 14088532600*3002
.Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: TX -> SETUP pd = 8 callref = 0x0098
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98386
Exclusive, Channel 6
Calling Party Number i = 0x2180, '911'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '14088532600*3002'
Plan:ISDN, Type:National
Redirecting Number i = 0xFF, '3002'
Plan:Reserved, Type:Reserved
.Apr 10 19:26:33.889: ISDN Se2/1:23 Q931: RX <- CALL_PROC pd = 8
callref = 0x8098
Channel ID i = 0xA98386
Exclusive, Channel 6
.Apr 10 19:26:33.961: ISDN Se2/1:23 Q931: RX <- ALERTING pd = 8
callref = 0x8098
Progress Ind i = 0x8088 - In-band info or appropriate now available
.Apr 10 19:26:34.321: ISDN Se2/1:23 Q931: RX <- CONNECT pd = 8 callref = 0x8098
.Apr 10 19:26:34.325: %ISDN-6-CONNECT: Interface Serial2/1:5 is now
connected to 14088532600*3002 N/A
.Apr 10 19:26:34.325: ISDN Se2/1:23 Q931: TX -> CONNECT_ACK pd = 8
callref = 0x0098
.Apr 10 19:26:34.325: ISDN Se2/1:23 Q931: TX -> CONNECT pd = 8 callref = 0x8240
.Apr 10 19:26:34.337: ISDN Se2/1:23 Q931: RX <- CONNECT_ACK pd = 8
callref = 0x0240
.Apr 10 19:26:34.337: %ISDN-6-CONNECT: Interface Serial2/1:0 is now
connected to 911 N/A
BR1#
BR1#
.Apr 10 19:26:42.017: ISDN Se2/1:23 Q931: RX <- DISCONNECT pd = 8
callref = 0x0240
Cause i = 0x8290 - Normal call clearing
.Apr 10 19:26:42.021: %ISDN-6-DISCONNECT: Interface Serial2/1:0
disconnected from 911 , call lasted 7 seconds
.Apr 10 19:26:42.021: ISDN Se2/1:23 Q931: TX -> RELEASE pd = 8 callref = 0x8240
.Apr 10 19:26:42.029: ISDN Se2/1:23 Q931: RX <- RELEASE_COMP pd = 8
callref = 0x0240
.Apr 10 19:26:42.041: %ISDN-6-DISCONNECT: Interface Serial2/1:5
disconnected from 14088532600*3002 , call lasted 7 seconds
.Apr 10 19:26:42.041: ISDN Se2/1:23 Q931: TX -> DISCONNECT pd = 8
callref = 0x0098
Cause i = 0x8090 - Normal call clearing
.Apr 10 19:26:42.049: ISDN Se2/1:23 Q931: RX <- RELEASE pd = 8 callref = 0x8098
.Apr 10 19:26:42.053: ISDN Se2/1:23 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x0098
BR1#
Unity trace:
12:15:38:921,AvDiagnostics_MC,155,2804,-1,,SkinnyTSP,12,[Thread
0x00000AF4] [Device 5] Receive StationCallInfoMessage (388 bytes)
callingPartyName='' callingParty='911' calledPartyName='Voicemail'
calledParty='2600' lineInstance=1 callReference=33555382
callType=1=TsInBoundCall originalCalledPartyName=''
originalCalledParty=' 3002' lastRedirectingPartyName='SA Ph2'
lastRedirectingParty='3002' originalCdpnRedirectReason=0=RfrNoReason
lastRedirectingReason=2=RfrCallFwdRNA cgpnVoiceMailbox=''
cdpnVoiceMailbox='2600' originalCdpnVoiceMailbox=''
lastRedirectingVoiceMailbox='3002' callInstance=1
callSecurityStatus=0=CallSecurityStatusUnknown
partyPIRestrictionBits=0