Previously, I have configured for H323 and the ISDN Layer 2 is
working. I can make test call out to PSTN.
However, I have problem getting ISDN Layer 2 up with
MULTIPLE_FRAME_ESTABLISHED for MGCP config.

CCM - 4.1.(3)sr8a
HQ Router - Cisco 2811 (C2800NM-ADVENTERPRISEK9_IVS_LI-M)

HQ# debug isdn q921

*Apr 28 01:20:39.327: ISDN Se0/2/0:23 Q921: User RX <- SABMEp sapi=0 tei=0
*Apr 28 01:20:39.331: ISDN Se0/2/0:23 Q921: S4_SABME: BACKHAULED &
vsc_wants_L2_up = FALSE


===== ISDN Status =====

HQ#show isdn status
Global ISDN Switchtype = primary-ni

%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output
may not apply

ISDN Serial0/2/0:23 interface
        dsl 0, interface ISDN Switchtype = primary-ni
        L2 Protocol = Q.921 0x0000  L3 Protocol(s) = CCM MANAGER 0x0003
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Active dsl 0 CCBs = 0
    The Free Channel Mask:  0x807FFFFF
    Number of L2 Discards = 0, L2 Session ID = 1
    Total Allocated ISDN CCBs = 0
HQ#

==== CCM Layer 3 Backhaul Status =====

HQ#show ccm-manager
MGCP Domain Name: HQ
Priority        Status                   Host
============================================================
Primary         Registered               10.34.200.20
First Backup    None
Second Backup   None

Current active Call Manager:    10.34.200.20
Backhaul/Redundant link port:   2428
Failover Interval:              30 seconds
Keepalive Interval:             15 seconds
Last keepalive sent:            01:24:11 UTC Apr 28 2009 (elapsed
time: 00:00:12)
Last MGCP traffic time:         01:24:21 UTC Apr 28 2009 (elapsed
time: 00:00:02)
Last failover time:             None
Last switchback time:           None
Switchback mode:                Graceful
MGCP Fallback mode:             Not Selected
Last MGCP Fallback start time:  None
Last MGCP Fallback end time:    None
MGCP Download Tones:            Disabled
TFTP retry count to shut Ports: 2

Backhaul Link info:
    Link Protocol:      TCP
    Remote Port Number: 2428
    Remote IP Address:  10.34.200.20
    Current Link State: OPEN
    Statistics:
        Packets recvd:   0
        Recv failures:   0
        Packets xmitted: 0
        Xmit failures:   0
    PRI Ports being backhauled:
        Slot 0, VIC 2, port 0
FAX mode: cisco
Configuration Error History:
HQ#


==== MGCP Config on HQ Router =====


card type t1 0 2
network-clock-participate wic 2

isdn switch-type primary-ni


controller T1 0/2/0
 cablelength long 0db
 pri-group timeslots 1-24 service mgcp


interface Serial0/2/0:23
 no ip address
 encapsulation hdlc
 isdn switch-type primary-ni
 isdn incoming-voice voice
 isdn bind-l3 ccm-manager
 no cdp enable

voice-port 0/2/0:23


ccm-manager mgcp

ccm-manager music-on-hold
ccm-manager config server 10.34.200.20
ccm-manager config

mgcp
mgcp call-agent 10.34.200.20 2427 service-type mgcp version 0.1
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 ecm
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface FastEthernet0/0.640
mgcp bind media source-interface FastEthernet0/0.640

mgcp profile default

dial-peer voice 10 pots
 service mgcpapp
 port 0/2/0:23

Reply via email to