Ken: The @ is not correct. Enter in hostname.domain format. Larry Hadrava CCIE #12203 CCNP CCNA Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com
On Fri, May 8, 2009 at 3:07 PM, Ken Kov <[email protected]> wrote: > My original registered info is: > - UCM Gateway = hq2821, which is hostname of router > - UCM Endpoint-Name = S0/SU0/ds...@hq2821 > - sh mgcp endpoints on router = S0/SU0/ds...@hq2821 > - Therefore all is well > > I then: > - Add "ip domain-name lab.com" in router > - Change UCM Gateway = [email protected] > - UCM Endpoint-Name now = S0/SU0/ds...@[email protected] > - no mgcp, mgcp in router > - Router "sh mgcp endpoints" still says S0/SU0/ds...@hq2821 > - Therefore no registration > > Any ideas on how to add the ip domian-name without having to start over? > > Thanks > > --- On *Fri, 5/8/09, Larry Hadrava <[email protected]>* wrote: > > > From: Larry Hadrava <[email protected]> > Subject: Re: [OSL | CCIE_Voice] Add Domain on MGCP Gateway V3 > To: "Ken Kov" <[email protected]> > Cc: [email protected] > Date: Friday, May 8, 2009, 12:22 PM > > > Ken: > Normally, you would change/add domain info on CCM or UCM for the GW, change > the information on the GW, then issue the commands: > > no mgcp > mgcp > > And this did not work for you? > > Larry Hadrava > CCIE #12203 CCNP CCNA > Sr. Support Engineer – IPexpert, Inc. > URL: http://www.IPexpert.com <http://www.ipexpert.com/> > > > On Fri, May 8, 2009 at 11:32 AM, Ken Kov > <[email protected]<http://us.mc01g.mail.yahoo.com/mc/[email protected]> > > wrote: > >> I want to add a domain suffix through the "ip domain-name" command on >> an MGCP router that is already registered without that command. I can't >> seem to do that and get it to re-register without having to delete and >> rebuild the gateway. I've restarted CallManager, reloaded the router, done >> the no mgcp and mgcp commands. >> >> Does anyone know of a way to do this without having to delete the gateway >> and rebuild with the domain suffix? >> >> Thanks >> >> > >
