Cause i = 0xC2E5 - Message not compatible with call state - indicates you may not have the ISDN switch type set correctly / ISDN protocol mismatch
> > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 19 May 2009 12:18:35 +1000 > From: "Kumar, Narinder" <[email protected]> > Subject: Re: [OSL | CCIE_Voice] call from PSTN to Br-1 ? > To: junk cisco <[email protected]>, "[email protected]" > <[email protected]> > Message-ID: > <[email protected]> > Content-Type: text/plain; charset="us-ascii" > > What's the Gateway type MGCP or H323 ?? > > From: [email protected] > [mailto:[email protected]] On Behalf Of junk cisco > Sent: Monday, 18 May 2009 5:49 PM > To: [email protected] > Subject: [OSL | CCIE_Voice] call from PSTN to Br-1 ? > > hi, > > I made test call from PSTN to BR-1, call ring fine, but when I answered , it > disconnect > > and debug > ============ > Cause i = 0x80E1 - Message type not implemented > Call State i = 0x0B > *May 18 08:57:40.326: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = > 0x00 > 91 > BR-1# > *May 18 08:57:40.334: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = > 0x00 > 91 > Cause i = 0xC2E5 - Message not compatible with call state > *May 18 08:57:40.354: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref > = > 0x8091 > BR-1# > > _________________________________________________________________ Hotmail® goes with you. http://windowslive.com/Tutorial/Hotmail/Mobile?ocid=TXT_TAGLM_WL_HM_Tutorial_Mobile1_052009
