Did you assign the mac of the ephone statically? If so, try and delete it and allow the phone to auto register. If you didn't enable auto registration under telephony setup, you would need to do so.
Larry Hadrava CCIE #12203 CCNP CCNA Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On Thu, Jun 18, 2009 at 8:21 PM, Amp <[email protected]> wrote: > Hey Mark or Vik, > Do either one of you have any advice or input that you can give me on this? > > Quoting Amp <[email protected]>: > > Hey Bill, >> Nothing has the .50 address, I have tried to get the phone to drop the >> .51 address to see if it would pick up the .50 but it is a stubborn lil >> thing. There's only one leased address and that's the .51 that the >> phone has. >> >> BR2-RTR#sh ip dhcp pool >> >> Pool CME : >> Utilization mark (high/low) : 100 / 0 >> Subnet size (first/next) : 0 / 0 >> Total addresses : 254 >> Leased addresses : 1 >> Pending event : none >> 1 subnet is currently in the pool : >> Current index IP address range Leased addresses >> 10.10.202.1 10.10.202.1 - 10.10.202.254 1 >> BR2-RTR# >> Quoting Bill Talley <[email protected]>: >> >> What has the .50 ip address? >>> >>> Sent from a mobile phone with very tiny touchscreen keys. Please >>> excuse my typos. >>> >>> -----Original Message----- >>> From: Amp <[email protected]> >>> Sent: Thursday, June 18, 2009 6:08 PM >>> To: Aamir Panjwani <[email protected]> >>> Cc: CCIE-Voice <[email protected]> >>> Subject: Re: [OSL | CCIE_Voice] Need Help, SCCP Ephone Will Not Register >>> >>> Hey Aamir, >>> Yeah I debugged tftp events and I see that it looks for the files, >>> finds them, and opens them, and as far as DHCP the phone gets an IP >>> address in the range that is being allowed in the DHCP config. >>> >>> BR2-RTR(config-ephone)#do sh run | sec dhcp >>> ip dhcp excluded-address 10.10.202.1 10.10.202.49 >>> ip dhcp excluded-address 10.10.202.70 10.10.202.254 >>> ip dhcp pool CME >>> network 10.10.202.0 255.255.255.0 >>> default-router 10.10.202.1 >>> option 150 ip 10.10.110.3 >>> BR2-RTR(config-ephone)# >>> >>> BR2-RTR(config-ephone)#do sh ip dhcp bind >>> Bindings from all pools not associated with VRF: >>> IP address Client-ID/ Lease expiration Type >>> Hardware address/ >>> User name >>> 10.10.202.51 0100.1bd4.c6c1.36 Jun 20 2009 01:06 AM >>> Automatic >>> BR2-RTR(config-ephone)# >>> >>> BR2-RTR#sh cdp nei f0/3/0 det >>> ------------------------- >>> Device ID: SEP001BD4C6C136 >>> Entry address(es): >>> IP address: 10.10.202.51 >>> Platform: Cisco IP Phone 7960, Capabilities: Host >>> Interface: FastEthernet0/3/0, Port ID (outgoing port): Port 1 >>> Holdtime : 179 sec >>> >>> Version : >>> P003-08-9-00 >>> >>> advertisement version: 2 >>> Duplex: full >>> Power drawn: 6.300 Watts >>> >>> BR2-RTR# >>> >>> >>> >>> >>> Quoting Aamir Panjwani <[email protected]>: >>> >>> Make sure phone can get to DHCP/TFTP. Also try changing max ephone and >>>> max dn to higher value. Double check phone type and mac address is >>>> correct :) >>>> >>>> >>>> Debug tftp events >>>> Debug ip dhcp server events >>>> >>>> >>>> >>>> >>>> >>>> -----Original Message----- >>>> From: [email protected] >>>> [mailto:[email protected]] On Behalf Of Amp >>>> Sent: Friday, 19 June 2009 8:49 AM >>>> To: CCIE-Voice >>>> Subject: [OSL | CCIE_Voice] Need Help, SCCP Ephone Will Not Register >>>> >>>> Hey Gang, >>>> I am having some trouble with getting the Br2 SCCP phone to register >>>> after I go through the telephony-service setup and configure >>>> everything according to section 1.8 of Lab1A. A debug ephone register >>>> doesn't return anything. I have reset and restarted the phone to no >>>> success. Anyone have any ideas on what else I can check to figure this >>>> out? >>>> >>>> Here's a copy of the telephony-service config: >>>> >>>> BR2-RTR#sh run | sec tele >>>> telephony-service >>>> em logout 0:0 0:0 0:0 >>>> max-ephones 1 >>>> max-dn 1 >>>> ip source-address 10.10.110.3 port 2000 >>>> auto assign 1 to 1 >>>> network-locale ES >>>> network-locale 1 ES >>>> network-locale 2 ES >>>> network-locale 3 ES >>>> network-locale 4 ES >>>> load 7960-7940 P003-08-9-00 >>>> max-conferences 8 gain -6 >>>> transfer-system full-consult >>>> create cnf-files version-stamp 7960 Jun 19 2009 00:12:38 >>>> >>>> BR2-RTR#sh run | sec ephone >>>> max-ephones 1 >>>> ephone-dn 1 dual-line >>>> number 3001 >>>> ephone 1 >>>> no phone-ui speeddial-fastdial >>>> no multicast-moh >>>> mac-address 001B.D4C6.C136 >>>> keepalive 30 auxiliary 0 >>>> codec g729r8 pre-ietf >>>> type 7960 >>>> button 1:1 >>>> BR2-RTR# >>>> >>>> >>>> ______________________________________________________________________ >>>> This email has been scanned by the MessageLabs Email Security System. >>>> For more information please visit http://www.messagelabs.com/email >>>> ______________________________________________________________________ >>>> >>>> ______________________________________________________________________ >>>> This email has been scanned by the MessageLabs Email Security System. >>>> For more information please visit http://www.messagelabs.com/email >>>> ______________________________________________________________________ >>>> >>>> >>> >>> >>> >>> > > >
