It takes a couple more minutes after startup for all the services to finish starting. utils service list
Not sure what service needs to be started for the admin web pages to come up. I am guess one or more of these: I am guessing CallManager Admin. Cisco CallManager[STARTED] Cisco CallManager Admin[STARTED] Cisco Tomcat[STARTED] Cisco Tomcat Stats Servlet[STARTED] ________________________________ From: [email protected] [[email protected]] On Behalf Of Jason L. Hawkins [[email protected]] Sent: Saturday, July 11, 2009 7:56 PM To: [email protected] Subject: [OSL | CCIE_Voice] Cisco UC in VMWare Hello, I am trying to install Cisco UC in VMWare for my home/work lab but am unable to log into the application interface after the system finishes installing. I've been trying different install scenarios for over a week now with little success. I've tried on ESXi 3.5 update 4 I've tried in Workstation 6. I've tried different disk emulation modes and sizes from 72GB to 120GB. I've tried different amounts of memory but everything I've tried doesn't seem to allow me to log into the application web interface. I have used a CUCM 6.1.2 DVD with UC 2.1 to install UC with also tried using a CUCM 6.0.1 DVD with UC 2.0.1. The install completes successfully when installed in as a VMWare Workstation 6 image. After the install I can log into the CLI, the OS administration website, and the Disaster Recovery System. But when I try to log into any of the application websites (Cisco Unified Serviceability, Cisco Unity Connection Administration, Cisco Unity Connection Serviceability) it always returns with a login failure. >From with in the CLI logged in as the admin I've tried using "utils >reset_ui_administrator_name" and "utils reset_ui_administrator_password" to >set a new application admin user name and password. The "utils reset_ui_administrator_name" runs successfully but when I try using "utils reset_ui_administrator_password" I get this: admin:utils reset_ui_administrator_password New password: Confirm new password: -------------------- utils reset_ui_administrator_password -------------------- Reset user interface password appadmin 07/11/2009 18:39:48.050 | Update FAILED: code = 1, AUTHORIZATION FAILURE admin: What am I doing wrong here? The other main scenario is trying to load UC on ESXi. The install has failed each time so far. The install gets about an hour in then one of the commands "times out." Then install program kicks me out. The ESXi system is a 7825 H2. The VM Workstation system is a 64bit - quad core with 4GB RAM. I know I must be missing something small but this is really driving me crazy. Please let me know what I'm doing wrong. and FYI the CUCM install from both versions works no problem. Jason
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
