So far the most "consistent" way I have found to get a phone on CME converted
to SIP from Skinny is:
1. Unplug the phone(s) to be converted
2. Let you ALL of skinny phones register
Optional - input "no auto-regist" under telephony-service
3. Set up your voice register global,dn, template, and pool and ALL the tftp
commands for the SIP phone and image
4. Under telephony-service change the load command to the SIP image name
5. Plug in the phones to be converted - they will load the sip image after
about a 2 minute delay - do a debug tftfp event to see the interchange
6. If your voice register and tftp commands are correct the phone should
register in a few minutes
7. be sure to change the load statement under telephony-service back to the
SCCP image name.
There may be better ways - but this seems to work everytime without a huge
delay - although it is NOT as fast as getting a skinny phone up.
Cheers!
Art
_________________________________________________________________
Get back to school stuff for them and cashback for you.
http://www.bing.com/cashback?form=MSHYCB&publ=WLHMTAG&crea=TEXT_MSHYCB_BackToSchool_Cashback_BTSCashback_1x1
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
