hi,
I register IP Blue as PSTN phone in PSTN router , then I make a test call (from
PSTN phone to BR-1)
when I run the debug :
- debug isdn q931 (show nothing)
- debug voice ccapi inout (not properly show the digit i dialled)
when I dial 888888, i just show 88 , also sometimes 911
when i dial 13123012222, show nothing
any input ? what is the right debug ? and why ?
config in PSTN
-------------------------
interface Serial3/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn protocol-emulate network
isdn incoming-voice voice
no cdp enable
!
---------------------------
dial-peer voice 100 pots
description == BR1 3123YYXXXX
destination-pattern ^1312301....
port 3/1:15
forward-digits 10
dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
---------------------------
sh ephone registered
=================
sh ephone registered
ephone-1 Mac:0002.55B4.6AAC TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 4
and Server in ver 3
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:1
IP:9.17.112.254 3118 7961 keepalive 0 max_line 6
button 1: dn 1 number 911 CH1 IDLE
button 2: dn 2 number 17755041111 CH1 IDLE
button 3: dn 3 number 13122042222 CH1 IDLE
tks
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
