Hmm. On your H323 gatewat configuration page do you have "Wait for far end Terminal Capabilities Set" checked off..? If so, try unchecking and test again.
Dan ----- Original Message ----- From: Omotayo <[email protected]> To: Daniel Rodriguez Cc: OSL Group <[email protected]> Sent: Wed Oct 28 18:47:30 2009 Subject: Re: [OSL | CCIE_Voice] calls through gatekeeper yes when it passes through the CUBE, it shows connected while it still rings and diconnect after few rings i have set the incoming and outgoing dial-peer on the CUBE TO G711 On Wed, Oct 28, 2009 at 11:31 PM, Daniel Rodriguez <[email protected]> wrote: Are these calls going to SIP phones at BR2? I don't recall if this was asked before so disregard if I'm being redundant, but have you eliminated codec negotiation as the cause by assigning your dial-peers and or regions for g711u across all? Dan ----- Original Message ----- From: [email protected] <[email protected]> To: OSL Group <[email protected]> Sent: Wed Oct 28 18:19:54 2009 Subject: [OSL | CCIE_Voice] calls through gatekeeper Hello, Still having issues with this when i call from hq to br2 phones through the gatekeeper it rings on pick up it disconnects Any one with an idea on what am missing Regards _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
