I'm looking through this as I'm sending. I also wanted to note that I set the Service Parameter "BRQ Enable" to True, because I noticed that the DRQs were coming shortly after the BRQ were sent by the CME.
*Feb 20 03:18:10.457: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: got a TIMER event *Feb 20 03:18:10.457: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_handle_timers *Feb 20 03:18:10.457: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_handle_timers: managed timer expired 0x47620C08 *Feb 20 03:18:10.733: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup R1# *Feb 20 03:18:13.393: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup *Feb 20 03:18:13.393: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_arq: arqp=0x4A5F7A4C,crv=0x37, answerCall=0 *Feb 20 03:18:13.393: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC *Feb 20 03:18:13.393: //95E2E82B812F/95E2E82B8131/GK/gk_dns_query: No Name servers *Feb 20 03:18:13.393: //95E2E82B812F/95E2E82B8131/GK/rassrv_get_addrinfo: (1#17752011001) Matched tech-prefix 1# *Feb 20 03:18:13.393: //95E2E82B812F/95E2E82B8131/GK/rassrv_get_addrinfo: (1#17752011001) Matched zone prefix 1 and remainder 7752011001 *Feb 20 03:18:13.393: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1 *Feb 20 03:18:13.393: //95E2E82B812F/95E2E82B8131/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x4A696CA4 *Feb 20 03:18:13.393: //95E2E82B812F/95E2E82B8131/GK/rassrv_arq_select_viazone: matched zone is ZONE_01, an R1#d z_invianamelen=0 *Feb 20 03:18:13.393: //95E2E82B812F/95E2E82B8131/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x4A696CA4 *Feb 20 03:18:13.393: //95E2E82B812F/95E2E82B8131/GK/rassrv_arq_select_viazone: matched zone is ZONE_01, and z_outvianamelen=0 *Feb 20 03:18:13.397: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1 *Feb 20 03:18:13.421: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup *Feb 20 03:18:13.421: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_arq: arqp=0x4AD8C8B8,crv=0x8037, answerCall=1 *Feb 20 03:18:13.421: //95E2E82B812F/95E2E82B8131/GK/gk_rassrv_dep_arq: ARQ Didn't use GK_AAA_PROC *Feb 20 03:18:13.465: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup *Feb 20 03:18:13.469: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_brq: state = 0xF *Feb 20 03:18:13.469: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_brq: brqp=0x4A6F94A8, crv=0x8037, bandWidth=160 R1# R1# *Feb 20 03:18:22.781: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup *Feb 20 03:18:22.781: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_brq: state = 0xF *Feb 20 03:18:22.781: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_brq: brqp=0x4A6F94A8, crv=0x37, bandWidth=0 *Feb 20 03:18:22.785: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup *Feb 20 03:18:22.805: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup *Feb 20 03:18:22.805: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_arq: arqp=0x4AB97164,crv=0x8038, answerCall=1 *Feb 20 03:18:22.805: //95E2E82B812F/95E2E82B8131/GK/gk_rassrv_dep_arq: ARQ Didn't use GK_AAA_PROC R1# *Feb 20 03:18:25.457: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: got a TIMER event *Feb 20 03:18:25.457: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_handle_timers *Feb 20 03:18:25.457: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_handle_timers: managed timer expired 0x47620C08 R1# *Feb 20 03:18:27.825: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup *Feb 20 03:18:27.829: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup R1# *Feb 20 03:18:33.965: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup *Feb 20 03:18:34.381: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT (minor 0) wakeup R1# *Feb 20 03:18:40.457: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: got a TIMER event *Feb 20 03:18:40.457: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_handle_timers *Feb 20 03:18:40.457: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_handle_timers: managed timer expired 0x47620C08 Thanks, Jeff -----Original Message----- From: Mustafa [mailto:afat...@verizon.net] Sent: Friday, February 19, 2010 6:09 PM To: Jeff Price (jeffpric) Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Gatekeeper Issue Jeff, Do a "debug gatekeeper main 10" on the gatekeeper and check/send the output when you make a call. It will tell you whats happening and if there is a routing failure at the gatekeeper. Also, take a look at this documentation http://www.cisco.com/en/US/docs/ios/voice/cubegk/configuration/guide/ve_ book/ve_book.html , it details how to configure gatekeeper with CUBE and its a good read. -- Mustafa Jeff Price (jeffpric) wrote: > > Hi everyone, > > I'm having an issue with my gatekeeper. When calling from CUCM to GK > to CME, the calls go through. I know this because I have shutdown the > T1 controller and completed the calls. However, when calling from the > CME to GK to CUCM, the calls do not go through. I have been analyzing > the debug h225 asn1 output for an answer and I'm not finding one. The > GK even sends an ACF, but shortly after CME sends a DRQ. I was > figuring either a BW or codec/h245 issue, but I haven't configured an > CAC for the GK and it doesn't seem to be a codec negotiation issue, > because the calls wouldn't go through from CUCM to CME via the GK. I > have the Regions configured to use G729 on the CUCM side and the > dial-peers to use g2729r8 on CME. > > I'm attaching the RAS output. If anyone wants some more information > I'll be happy to send it. > > The thing that is standing out to me the most is this in the DRQ > message - terminationCause releaseCompleteCauseIE : '08028090'H. The > only thing I found on google for it seems like it's the standard DRQ > cause IE. So I'm not finding anything worthwhile. > > Any help is appreciated. Thanks a lot. > > http://www.cisco.com/cisco/web/UK/images/emails/signaturetool/the_human_ network_logo.jpg > > > > *Jeff Price** > Network Consulting Engineer - Unified Communications Practice* > * > * > jeffp...@cisco.com <mailto:jeffp...@cisco.com> > Phone: *408-525-8293* > Mobile: *408-204-4510* > > ** > > > > *Cisco Systems, Inc.* > 170 West Tasman Drive, > San Jose, CA 95134-1706 > USA > Cisco home page <http://www.cisco.com/> > > > > http://www.cisco.com/cisco/web/UK/images/emails/signaturetool/welcome_to _human_network_lo.jpg > > http://www.cisco.com/global/EMEA/brand/signature/capital/green.gifThink > before you print. > > This email may contain confidential and privileged material for the > sole use of the intended recipient. > > Any review, use, distribution or disclosure by others is strictly > prohibited. If you are not the intended > > recipient (or authorized to receive for the recipient), please contact > the sender by reply email and > > delete all copies of this message. > > For corporate legal information go to: > http://www.cisco.com/web/about/doing_business/legal/cri/index.html > > ------------------------------------------------------------------------ > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
