I was on pod 15 Randall
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Saturday, February 20, 2010 9:00 AM To: [email protected] Subject: CCIE_Voice Digest, Vol 48, Issue 115 Send CCIE_Voice mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Voice digest..." Today's Topics: 1. VOL2 LAB 6 (kavi ten) 2. VOL2 LAB 6 UCME with UC (kavi ten) ---------------------------------------------------------------------- Message: 1 Date: Sat, 20 Feb 2010 18:55:30 +0400 From: kavi ten <[email protected]> Subject: [OSL | CCIE_Voice] VOL2 LAB 6 To: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset="iso-8859-1" Hi Guys, I got stuck at the Teho dialing Question 4.5 I have the CME dial-peer configured & it works fine as the call to HQ/BR1 hits the GK I also have the translation pattern configured to match the incoming call same as in the PG 1#39001972XXXXXXX FOR 3303333 with called no xformation Still the call is not going to the BR1 gw & same the case with HQ calls The call then dial from BR2 PRI as per the preference. I can not understand how this should work as I have all parameter configured. Can some one guide me through how to go about this. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/28296b94/attachment-0001.htm ------------------------------ Message: 2 Date: Sat, 20 Feb 2010 19:58:10 +0400 From: kavi ten <[email protected]> Subject: [OSL | CCIE_Voice] VOL2 LAB 6 UCME with UC To: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset="iso-8859-1" Hi Guys, When have the done the configuration as per the Guide, but the BR2 Phn1 phone on busy /noan , the incoming call gets disconnected. I checked the debug voice ccapi inout , which says disconnect cause of 19 , means no answer from the UC. Has any one come across this problem. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/73fa1cc5/attachment-0001.htm ------------------------------ _______________________________________________ CCIE_Voice mailing list [email protected] http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 48, Issue 115 ******************************************* _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
