Hi Steve, I had a similar problem and the first thing I did was to do a "debug ccsip messages" on the BR2 router. My guess is you will see an unauthorized error message. If that is the case as it were for me, you may want to try using the command - " authenticate realm proctorlabs.com" under voice register global to see if the problem goes away.
Thanks Kalyan From: "Steve Denney (stdenney)" <[email protected]> To: <[email protected]> Date: 03/02/2010 09:17 AM Subject: [OSL | CCIE_Voice] Vol 1 Lab 5C - CME SIP Phone not registering Sent by: [email protected] Hi Gang, Just need a sanity check here. :) As usual I’m having trouble getting my remote CME SIP Phone (BR2 Ph 2, DN 3005) registered to CME. After many previous efforts at getting the right SIP FW loads via the TFTP server on the BR2 router, this time I took advice ;) and pointed the DHCP option 150 to the CUCM Sub. That seemed to work as far as getting the proper SIP load onto the 7960, since sh cdp ne now shows a SIPxxxxxxxxxxxx (not SEPxxxxxxxxxxxx, as it was when I first booted) device name. So I think that part is OK. The phone is still not registering to CME though. (My remote X-Lite SIP client is registered fine.) I’ve done another shut on the interface, did a no crea prof / crea prof, still no joy. I am quite sure I’m missing an obvious step. :) Any suggestions for troubleshooting? cheers, sd _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
