In my experience changing the call manager service parameters for default inter 
and intra region codecs to g729 causes this to work in both directions.  As 
long as your dial-peer is g729 and the GK trunk is in a g729 region.

Matt

On May 21, 2010, at 12:06 PM, Graham Hopkins wrote:

> Matthew - I found that the call from HQ to BR is fine and shows 16kbps, its 
> the call from BR2 to HQ that has the problem, so to complete the task just 
> make the call in the right direction :-)
> 
> Did you have the same issue ?
> 
> 
> 
> Regards
> 
> Graham Hopkins
> 
> 
> 
> On 21 May 2010, at 16:50, Berry, Matthew J. wrote:
> 
>> That’s great to know.  I burned a few hours last night on Proctor trying to 
>> get this to work.
>>  
>> Hopefully we won’t be asked a question like that on the lab.  According to 
>> my understanding, then, we cannot technically complete and get points for 
>> question 5.1 since it requires you to produce the “show gatekeeper calls” 
>> output listed in the question.
>>  
>> Matthew Berry, CCVP, Sr. Unified Communications Engineer
>> mjbe...@kroll.com
>>  
>> From: Roger Källberg [mailto:roger.kallb...@cygate.se] 
>> Sent: Friday, May 21, 2010 10:44 AM
>> To: Berry, Matthew J.; CCIE Voice OSL (ccie_voice@onlinestudylist.com)
>> Subject: RE: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
>>  
>> Also this, 
>> http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16188.html
>>  
>> Roger Källberg
>> Unified Communication Consultant
>> Cygate AB
>> 
>>  
>> From: Berry, Matthew J. [mailto:mjbe...@krollontrack.com] 
>> Sent: den 21 maj 2010 17:21
>> To: CCIE Voice OSL (ccie_voice@onlinestudylist.com)
>> Subject: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
>>  
>> All –
>>  
>> I had an issue last night on Vol 2 Lab 2.  I am sending calls from HQ 
>> (Region = HQ) to BR2 over my H.225 trunk (Region = GK).  Region setting 
>> between HQ and GK specifies G.729.  I have a transcoder registered on the 
>> BR2 router.
>>  
>> When I call across the gatekeeper, my endpoints show G.729, but “show 
>> gatekeeper calls” shows 128kbps.
>>  
>> Extremely odd.  Does anyone have insight into this?
>>  
>>  
>> Thanks!
>>  
>> Matthew Berry, CCVP, Sr. Unified Communications Engineer
>> Kroll | 9023 Columbine Road, Eden Prairie, MN 55347
>> Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.com
>> www.krollontrack.com | www.kroll.com
>>  
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to