isdn switch-type primary-ni

!

ccm-manager switchback immediate

ccm-manager redundant-host 10.10.210.10

ccm-manager mgcp

!

!

controller T1 2/0

 framing esf

 linecode b8zs

 pri-group timeslots 1-3,24 service mgcp

!         

!

!

interface Loopback0

 ip address 10.10.110.2 255.255.255.255

 ip ospf network point-to-point

!

interface FastEthernet0/0

 no ip address

 duplex auto

 speed auto

!

interface Serial1/0

 no ip address

 encapsulation frame-relay IETF

 frame-relay lmi-type ansi

!

interface Serial1/0.1 point-to-point

 description LINK to HQ-RTR 

 ip address 10.10.111.2 255.255.255.0

 ip ospf mtu-ignore

 frame-relay interface-dlci 101   

!

interface Serial2/0:23

 no ip address

 encapsulation hdlc

 no logging event link-status

 isdn switch-type primary-ni

 isdn incoming-voice voice

 isdn bind-l3 ccm-manager

 isdn bchan-number-order ascending 

 no cdp enable

 

 

voice-port 2/0:23

!

mgcp

mgcp call-agent 10.10.210.11 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp bind control source-interface Loopback0

mgcp bind media source-interface Loopback0

 

From: [email protected]
[mailto:[email protected]] On Behalf Of Matthew Berry
Sent: 02 July 2010 14:42
To: [email protected]
Subject: Re: [OSL | CCIE_Voice] MGCP

 

Try a no mgcp / mgcp on the gateway.  When an MGCP router registers with
CUCM for the first time, it will use the serial interface.  If it doesn't
work, please send your config.



Matthew Berry

 

Vitals:

GVoice: +1.612.424.5044

Gmail: [email protected]

Skype: ciscovoiceguru

Twitter: ciscovoiceguru


On 7/2/2010 8:36 AM, Duncan Hamilton-Walker wrote: 

Hi All,

 

Why would my BR1-RTR being registering with UCM on the serial sub interface
10.10.111.2

When i have configured it to use the Loopback0 for source packets..
10.10.110.2 

 

Plus i think is not helping with making any call out of the gateway !! 

 

Thanks

Duncan

 
 
_______________________________________________
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
  

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.830 / Virus Database: 271.1.1/2973 - Release Date: 07/01/10
19:35:00

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to