Dear All, I face problem with br1 router it seems register as in fallback mode (I add the br1 router in cucm) and did the configuration as attachment , and no mgcp then mgcp also I restart the router (also I removed ccm-manager fallback-mgcp )
I can register hq-router and br2 router as mgcp without any problem I need to add BR1-RTR as MGCP gateway I found some errors in preconfiguration in br1 **the preconfigure controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 (without service mgcp ) after I configured thi router and shudown voice-port to modify pri-group but Unfortunatly I get the following when show ccm-manger BR1-RTR(config)#do sh ccm MGCP Domain Name: BR1-RTR Priority Status Host ============================================================ Primary Down 10.10.210.11 First Backup Down 10.10.210.10 Second Backup None Current active Call Manager: None Backhaul/Redundant link port: 2428 Failover Interval: 30 seconds Keepalive Interval: 15 seconds Last keepalive sent: 19:45:06 cet Jul 2 2010 (elapsed time: 00:08:01) Last MGCP traffic time: 19:45:56 cet Jul 2 2010 (elapsed time: 00:07:11) Last failover time: None Last switchback time: None Switchback mode: Graceful MGCP Fallback mode: Enabled/ON Last MGCP Fallback start time: None Last MGCP Fallback end time: None MGCP Download Tones: Disabled TFTP retry count to shut Ports: 2
BR1-RTR#SH RUN Building configuration... Current configuration : 2946 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR1-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model memory-size iomem 20 clock timezone cet 1 clock summer-time cet recurring network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ! ! no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-ni ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice-card 0 no dspfarm ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 service mgcp ! controller T1 0/0/1 shutdown framing esf linecode b8zs ! ! ! ! ! interface Loopback0 ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn outgoing display-ie no cdp enable ! interface FastEthernet1/0 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 spanning-tree portfast ! interface FastEthernet1/1 ! interface FastEthernet1/2 ! interface FastEthernet1/3 ! interface FastEthernet1/4 ! interface FastEthernet1/5 ! interface FastEthernet1/6 ! interface FastEthernet1/7 ! interface FastEthernet1/8 ! interface FastEthernet1/9 ! interface FastEthernet1/10 ! interface FastEthernet1/11 ! interface FastEthernet1/12 ! interface FastEthernet1/13 ! interface FastEthernet1/14 ! interface FastEthernet1/15 ! interface Vlan1 no ip address ! interface Vlan130 ip address 10.10.101.1 255.255.255.0 ! interface Vlan240 ip address 10.10.201.1 255.255.255.0 ip helper-address 10.10.200.3 ! router ospf 1 log-adjacency-changes network 10.10.0.0 0.0.255.255 area 0 maximum-paths 2 ! ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/0/0:23 ! ccm-manager fallback-mgcp ccm-manager redundant-host 10.10.210.10 ccm-manager mgcp ! mgcp mgcp call-agent 10.10.210.11 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp package-capability rtp-package no mgcp timer receive-rtcp mgcp bind control source-interface Loopback0 mgcp bind media source-interface Loopback0 ! mgcp profile default ! ! ! ! ! ! gatekeeper shutdown ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 exec-timeout 0 0 privilege level 15 logging synchronous no login transport preferred none transport input telnet line vty 5 15 exec-timeout 0 0 privilege level 15 logging synchronous no login transport preferred none transport input telnet ! scheduler allocate 20000 1000 ntp server 10.10.100.2 end
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
