Ok, I was missing Privacy = Off on both phones. Now, when trying to cBarge, I immediately get a fast busy and the phone I am trying to cbarge from displays Cannot Complete Conference. I know the hardware conference on BR1 is registered to UCM, it is assigned to an MRG which is assigned to an MRGL that is assigned to DP_BR1. When I configured my dspfarm profile on BR1 the max sessions I could configure is 2. I believe that should still be adequate.
On Jul 14, 2010, at 11:12 PM, ccieid1ot wrote: > Set privacy to off. > > On Thu, Jul 15, 2010 at 12:30 AM, Mark Holloway <[email protected]> wrote: >> So, I have two phones Br1Ph1 and Br1Ph2 sharing the same DN. Both have the >> same softkey template I created called Standard User-CBarge which includes >> Remote in Use - CBarge. Both phones are in Device Pool BR1 which includes >> the BR1_MRGL which has MRG_BR1_HW_CONF assigned. This MRG contains the >> BR1-CONF which is my hardware conferencing on the BR1 router and shows as >> registered with UCM. On the Device > Phone page for both phones, I have >> Single Button Barge set to CBarge. >> >> If I understand CBarge correctly, when Br1Ph1 answers a call I should have >> the option on Br1Ph2 to press the CBarge softkey? Br1Ph2's lamp lights red >> when Br1Ph1 is on the shared line, but I never see a CBarge softkey. >> Perhaps I am missing something significant. >> >> >> >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
