I'm not disagreeing with you. So what is the usage of select and join key that mentioned in CME admin guide , conference section ?
Cheers, Jeremy On Thu, Jul 22, 2010 at 6:00 PM, Ashar Siddiqui <[email protected]> wrote: > I don’t think it would work that way. > > > > All participants must come through by dialling meetme number to join a > meetme conf (this is what I think) otherwise it won’t work. > > > > Ash> > > > > *From:* jeremy co [mailto:[email protected]] > *Sent:* 22 July 2010 08:51 > *To:* Ashar Siddiqui > *Cc:* [email protected]; [email protected] > *Subject:* Re: [OSL | CCIE_Voice] Meetme: cannot use join select softkeys > to join 3rd call to meetme conference > > > > Ph1 go to seized state and then press meetme softkey then dial 4200 (meetme > number) and ph2 and ph3 call to 4200 to join the conference. > > > > As I want to test join softkey feature , I made a call from PSTN to 4013. > PH1 answer the call and then I try to join 4013 and 4200 togther using > "select" and "join" key which is not working. > > > > > > > > Cheers, > > > > > > Jeremy > > On Thu, Jul 22, 2010 at 5:42 PM, Ashar Siddiqui <[email protected]> > wrote: > > Sorry didn’t understand this bit “Ph1 create meetme conference and ph2 and > ph3 joins to conference. PSTN call 4013 and ph1 picks up the call”. > > > > PSTN should call DDI of meet me number like XXXXXX4200 and I believe it > will go directly in conference. Why PSTN is dialling 4013?? > > > > Ash> > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *jeremy co > *Sent:* 22 July 2010 04:32 > *To:* [email protected]; [email protected] > *Subject:* [OSL | CCIE_Voice] Meetme: cannot use join select softkeys to > join 3rd call to meetme conference > > > > Hi All, > > > > I set up a meetme conference and assigned template to ephones with > appropriate keys. I cannot join another call to conference call. > > > > > > Here is what happen: > > > > meetme:4200 > > > > Ph1 : L1:4001 L3:4013 > > ph2: L1:4002 L3:4013 > > ph3 :4003 > > > > > > Ph1 create meetme conference and ph2 and ph3 joins to conference. PSTN call > 4013 and ph1 picks up the call. > > > > Using "select" key , I select 4013 call on line3. then I switch to line 1 > (4001) and press "select" , but nothing happens. So I cannot use "join" > softkey later to join 2 calls. > > > > telephony-service > > sdspfarm units 3 > > sdspfarm transcode sessions 4 > > sdspfarm tag 1 XCODER > > sdspfarm tag 2 CFBCFB > > no privacy > > conference hardware > > load 7960-7940 P0030702T023 > > load 7941 SCCP41.8-3-3S.loads > > load 7961 SCCP41.8-3-3S.loads > > load 7961GE SCCP41.8-3-3S > > max-ephones 30 > > max-dn 100 > > ip source-address 142.4.30.3 port 2000 > > auto assign 1 to 1 > > cnf-file location flash: > > dialplan-pattern 1 24044... extension-length 4 > > max-conferences 4 gain -6 > > transfer-system full-consult > > > > > > ephone-template 9 > > softkeys hold Select Join Resume Newcall > > softkeys seized Meetme Redial Cfwdall Endcall Gpickup Pickup Callback > > softkeys connected Hold Endcall Trnsfer Select RmLstC Join ConfList > Confrn > > ephone-template 20 > > softkeys hold Select Join Resume Newcall > > softkeys connected Hold Endcall Trnsfer Select RmLstC Join ConfList > Confrn > > ephone-dn 1 dual-line > > number 4001 > > description +85224044001 > > name BR2PH1 > > allow watch > > ephone-dn 2 > > number 4002 > > name BR2PH2 > > ephone-dn 3 > > number 4003 > > name BR2PH3 > > ephone-dn 13 octo-line > > number 4013 > > name Shared line > > > > > > ephone-dn 21 octo-line > > number 4200 > > conference meetme > > > > ephone 1 > > mac-address 000C.29B6.6BFC > > ephone-template 9 > > type CIPC > > button 1:1 2:15 6:13 > > ephone 2 > > mac-address 000C.29F9.A7F2 > > ephone-template 20 > > max-calls-per-button 3 > > busy-trigger-per-button 2 > > blf-speed-dial 1 4001 label "BLF4001" > > type CIPC > > button 1:2 2:16 6:13 7w1 > > ephone 3 > > privacy-button > > description +85224044003 > > mac-address 000C.298A.DC67 > > ephone-template 20 > > type CIPC > > button 1:3 6:11 > > ephone 4 > > mac-address 0005.9BF1.9C4F > > ephone-template 9 > > type 7960 > > button 1:1 2:15 6:13 > > > > > > > > cheers, > > > > > > Jeremy > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
