Hi Angel, I'm trying to achieve the same setup which connect my 7961 to cisco 2801 fa0/1, but the phone never get register and showing "Configuring IP..."
I configure a DHCP pool, from the debug i can see that the phone is sending the DHCPD and the server did response and offered an IP address to it, but the phone never receive. PSTN-WAN(dhcp-config)# Aug 2 21:45:59.367: DHCPD: Sending notification of DISCOVER: Aug 2 21:45:59.367: DHCPD: htype 1 chaddr 0019.e892.4a0c Aug 2 21:45:59.367: DHCPD: remote id 020a00000a0a640201000032 Aug 2 21:45:59.367: DHCPD: circuit id 00000000 Aug 2 21:45:59.367: DHCPD: DHCPDISCOVER received from client 0100.19e8.924a.0c on interface FastEthernet0/1.50. Aug 2 21:45:59.367: DHCPD: Seeing if there is an internally specified pool class: Aug 2 21:45:59.367: DHCPD: htype 1 chaddr 0019.e892.4a0c Aug 2 21:45:59.367: DHCPD: remote id 020a00000a0a640201000032 Aug 2 21:45:59.367: DHCPD: circuit id 00000000 Aug 2 21:47:39.383: DHCPD: Sending DHCPOFFER to client 0100.19e8.924a.0c (10.10.100.12). Aug 2 21:47:39.383: DHCPD: broadcasting BOOTREPLY to client 0019.e892.4a0c. The fa0/1 configuration as below: interface FastEthernet0/1 no ip address speed 100 full-duplex ! interface FastEthernet0/1.50 encapsulation dot1Q 50 native //50 is the VVLAN// ip address 10.10.100.2 255.255.255.0 I did explicitly configure the vlan setting on the phone itself. Did i miss out anything? Thanks Shingei On Tue, Mar 16, 2010 at 4:36 PM, Angel Perez <[email protected]> wrote: > > Hi: > > Thanks for the response, working here now also, I had to set the voice vlan > manualy on ip phone and then just create to subinterfaces on the fast 0/0 > interface with dot1q encapsulation > > Thanks > ------------------------------ > From: [email protected] > To: [email protected] > Subject: Re: [OSL | CCIE_Voice] ip phone on layer 3 interface > Date: Mon, 15 Mar 2010 21:17:51 -0500 > > CC: [email protected] > > I have tried it on 3600. It works > > Sent from my phone > > On Mar 15, 2010, at 3:52 AM, Angel Perez <[email protected]> wrote: > > Hello: > > Anybody has tested this? > > Thanks > > ------------------------------ > From: <[email protected]>[email protected] > To: <[email protected]>[email protected] > Date: Fri, 12 Mar 2010 17:57:35 +0000 > Subject: [OSL | CCIE_Voice] ip phone on layer 3 interface > > Hello: > > I want to connect an ip phone to a 2811 fast ether 0/0 interface (pstn > router) this way I wouldn't need a switch for the pstn phone > A xcable is needed but I'm not sure if a layer 3 interface is l2 switching > capable > > Any suggestion? > > Thanks > > ------------------------------ > ¿Sabes que la Videollamada de Messenger es GRATIS > ¡Descúbrela!<http://events.es.msn.com/windows-live/redes-sociales/default.aspx> > ------------------------------ > Hotmail: Powerful Free email with security by Microsoft. Get it > now.<https://signup.live.com/signup.aspx?id=60969> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit <http://www.ipexpert.com/>www.ipexpert.com > > > ------------------------------ > Hotmail: Powerful Free email with security by Microsoft. Get it > now.<https://signup.live.com/signup.aspx?id=60969> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
