Hi,
I've 3 routers which is HQ-RTR, BR1-RTR & BR2-RTR, The HQ-RTR configured as
GK as well as CUBE.
When i do a "show gatekeeper endpoints", GK shown that CUBE, BR1-RTR and
BR2-RTR registered correctly, but the "zone name" for the registered
devices become VIA instead of their origin zone.
I referred to the student guide, the zone name should display what i've
configured under GK configuration.
GK configuration:
################
interface Loopback0
ip address 10.10.110.1 255.255.255.255
interface Loopback1
ip address 10.10.110.10 255.255.255.255
h323-gateway voip interface
h323-gateway voip id VIA ipaddr 10.10.110.1 1719
h323-gateway voip h323-id CUBE
h323-gateway voip tech-prefix 1#
gatekeeper
zone local BR1 ipexpert.com 10.10.110.1 invia VIA outvia VIA
zone local BR2 ipexpert.com invia VIA outvia VIA
zone local VIA ipexpert.com
zone prefix BR1 1*
zone prefix BR2 3*
zone prefix VIA 5*
gw-type-prefix 1#* default-technology
no shutdown
###############
Q-RTR#sh gatek end
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
10.10.110.2 1720 10.10.110.2 56834 VIA <----why? VOIP-GW
E164-ID: 1001
H323-ID: BR1
Voice Capacity Max.= Avail.= Current.= 0
10.10.110.3 1720 10.10.110.3 49815 VIA <----why? VOIP-GW
H323-ID: BR2-GW
E164-ID: 3001
Voice Capacity Max.= Avail.= Current.= 0
10.10.110.10 1720 10.10.110.10 53994 VIA H323-GW
E164-ID: 5001
H323-ID: CUBE
Voice Capacity Max.= Avail.= Current.= 0
Total number of active registrations = 3
Am i miss out something?
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
