Yes that did the trick. Thank you! On Sep 24, 2010, at 4:20 PM, CCIE Voice GMAIL wrote:
> If I understand your question correctly, I believe the command you need to > add is this: > > sip-ua > mwi-server ipv4:<CUE address> > > if you are using unsolicited you just need to add the unsolicited keyword > > sip-ua > mwi-server ipv4:<CUE address> unsolicited > > http://www.ciscosystems.cg/en/US/docs/ios/voice/command/reference/vr_m3.html > #wp1373612 > > Hope this helps. > > > -----Original Message----- > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mark Holloway > Sent: Friday, September 24, 2010 3:53 PM > To: osl osl > Subject: [OSL | CCIE_Voice] Anyone get MWI to work with CUE in SRST? > > When BR2 is part of CUCM and CUE is integrated with CUCM through JTAPI I > could never get MWI to work if BR2 is in SRST. Has anyone been able to get > this working? Cisco docs say with older version of CUE it doesn't work. I > think they are referring to 2.x or 3.x, not 7.x. > > Thanks, > Mark > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com