Hey everyone,
I am looking for some help on CME presence. I have configured presence and its working with my SIP Phones, but it only works when there is an active call. There is SCPH1 with extension 4001 and SCPH2 with extension 4002. Both are configured with BLFs to point to the other phone. When I pick up SCPH1, the BLF on SCHPH2 does nothing. However, if I make a call with SCHPH1, the BLF on SCHPH2 will turn red. Has anyone experienced this before? Is this the accurate way to function with SIP Phones? Here is the relevant configurations: voice register global mode cme source-address 10.5.202.1 port 5060 max-dn 10 max-pool 2 load 7945 SIP45.9-0-3S load 7942 SIP42.9-0-3S authenticate register authenticate realm cisco.com url directory http://10.5.202.1/localdirectory/ tftp-path flash: create profile sync 0063161211015195 voice register dn 1 number 4001 allow watch name Site C Phone 1 label 4001 ! voice register dn 2 number 4002 allow watch name Site C Phone 2 label 4002 ! voice register pool 1 id mac 0024.9733.6C28 type 7942 number 1 dn 1 presence call-list dtmf-relay rtp-nte sip-notify voice-class codec 1 username scuser1 password cisco blf-speed-dial 1 4002 label "SCPh2 4002" device ! voice register pool 2 id mac 0024.14B2.F542 type 7945 number 1 dn 2 presence call-list voice-class codec 1 username scuser2 password cisco blf-speed-dial 1 4001 label "SCPh1 4001" device presence presence call-list sip-ua sip-server ipv4:10.5.202.1 presence enable Any help is appreciated! Jeff
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
