Hello Folks,
I have question regarding to Plus (+) sign in Fully globalized number.Is it
glitch/bug or Am I doing wrong?
Site-C >>>>> H.323 gateway and Site-B >>>>> H.323 gateway
When I call from Site-C to Site-B phone on phone display it shows me this
number without + sign (85224044002), Where as in ISDN Q931 message shows me
with +85224044002.
See out put below.
Display i = 'Site C Phone 2'
Calling Party Number i = 0x1180, '+85224044002'
Plan:ISDN, Type:International
Called Party Number i = 0x91, '19723033001'
Plan:ISDN, Type:International
Oct 21 19:35:02.404: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref =
0x8092
Channel ID i = 0xA98384
Exclusive, Channel 4
On both sides Phones I have seen below display on phones,Below is phone
display output while I am calling
Display on SC phone To 3001 and on
SiteB phone From Site C phone 2 (85224044002) <<<< without +(Plus) sign
My voice translation-rule, Profile and dial-peer are below,
!
voice translation-rule 3
rule 1 /^4...$/ /+8522404&/ type any international plan any isdn
!
!
voice translation-rule 13
rule 1 /.*/ /&/ type any international plan any isdn
!
!
voice translation-profile INT
translate calling 3
translate called 13
!
!
dial-peer voice 3000 pots
translation-profile outgoing INT
preference 1
destination-pattern 3...
port 0/0/0:15
prefix 19723033
!
Question:Is it glitch/bug or Am I doing something wrong?
Thanks,
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
