Hi Shrini, Can you ensure that the UCM mgcp config pump into the gateway correctly? Do a " sh ccm-manager" to verify.
Shingei On Fri, Nov 12, 2010 at 2:01 AM, Shrini <[email protected]> wrote: > Hi Iftikhar, > > In the translation pattern 9.1[2-9]XX[2-9]XXXXXX --> > > under calling party transformation select the check box use calling part's > external phone mask. > Calling party transform mask - XXXXXXXXXXX > Calling /called party number type : National > Calling/Called party numbering plan : ISDN > > In Gateway: > > Under Incoming calling part settings: > > Change the prefix to + from Default for National numbers. > > You will get +1XXXXXXXXXX as calling party displayed on phone and missed > calls > > Thx > Shrini > > > > On 11/10/2010 11:55 PM, Mujaddid Ahmed wrote: > > Hi, > > Please confirm what can be the reason of globalization not working with > cisco 7965 phones. > I globalized it on CUCM gateway configuration by adding appropriate prefix > on type of calls. > > did, no mgcp / mgcp on gateway and reset the gateway from cucm as well. > > call lands on phone and still shows only 7 digit calling number in both > ringing and missed call. > > nothing has been set so far in Device pool or on device to effect the > globalization done on Gateway. > > Is there any serivce parameter or any command on router that can prevent > the globalize display on phone? > > Please help, as i wasted lot of time in troubleshooting this particular > issue in a very time critical environment. > > Regards, > Iftikhar Ahmed > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
