Don't you have to session into the module to run initial setup, before the Web
GUI will be active.
In the session you run a setup that tells it whether your using CallManager or
CallManager express.
Also can you ping it from router?
From: [email protected]
[mailto:[email protected]] On Behalf Of Baktha Muralidharan
Sent: Wednesday, December 08, 2010 12:19 PM
To: [email protected]
Subject: [OSL | CCIE_Voice] CME GUI looks weird
Hi folks
As part of Lab 3A, I configured for GUI access into the CME, as follows
ip http server
ip http authentication local
ip http path flash:/GUI
and under telephony-service
web admin system name admin pass cisco
After this, I go into browser, and try to access the ccme.html page, I first
see the window go grey as expected, then see "View window" displayed at the top
left corner, and then the page comes up with the tabs "Configure", "Voice
Mail", "Administration", "Report" and "Help". However, the screen looks weird
and pressing the mouse on the tabs do not show the pull down menus. I have
pop-up blocker turned OFF on my browser. tried Mozilla as well as IE, to no
avail.
I then looked into flash:/GUI/CME_GUI_README.TXT, and on the first line, it
says "CME GUI Version 7.0.0.1".
any hints?
Thanks in advance,
/Baktha
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you._______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
