Hi Shrini,

Thanks for your time on this issue.
but i am still wondering , how my config is different than yours.
I disabled privacy under telephony service as well as under both ephones
but still did not work for me.

Please clarify further.
appreciate your help !

Regards,
Mritunjay

On Wed, Jan 19, 2011 at 6:11 AM, Shrini <[email protected]> wrote:

>  Hi Mrintunjay,
>
> Here is the working config. Took an hour to figure it out :-)
> There is a bug associated with CME 12.4T *CSCti11843*
>
> telephony-service
>  sdspfarm units 2
>  sdspfarm tag 1 BR1-CNF
>  no privacy
>  conference hardware
>  srst mode auto-provision none
>  srst ephone template 1
>  srst dn line-mode dual-octo
>  max-ephones 2
>  max-dn 10
>  ip source-address 14.160.116.40 port 2000
>  system message Your current option
>  time-zone 5
>  time-format 24
>  max-conferences 12 gain -6
>  transfer-system full-consult
>  create cnf-files version-stamp 7960 Jan 18 2011 07:20:56
> !
> !
> ephone-template  1
> softkeys remote-in-use CBarge Newcall
> !
> ephone-dn  1  dual-line
>  number 3001 no-reg primary
>  preference 5
> !
> ephone-dn  2  dual-line
>  number 3002 no-reg primary
>  preference 6
> !
> ephone-dn  3  octo-line
>  number A000
>  conference ad-hoc
>  preference 1
> !
> ephone  1
>  privacy off
> !
> ephone  2
>  privacy off
>
>
> On 1/18/2011 2:19 AM, Mritunjay Kumar wrote:
>
> Hi Shrini,
>
> http://onlinestudylist.com/archives/ccie_voice/2010-November/071295.html
>
> "privacy off"  under ephone-template  does not work as this is a bug.
> it is tested and discussed  at
> http://onlinestudylist.com/archives/ccie_voice/2010-November/071295.html
>
> but  i tried with ephone template but did not work either :(
>
> attaching sh runn .
>
> Regards,
> Mritunjay
>
> On Tue, Jan 18, 2011 at 2:16 PM, Miron Kobelski <[email protected]>wrote:
>
>> Hi,
>>
>> I suggest to follow Randall's suggestion, as this has already been
>> discussed many times...
>>
>> regards
>> kobel
>>
>>
>> On Mon, Jan 17, 2011 at 11:35, Mritunjay Kumar <[email protected]> wrote:
>>
>>> Hi All,
>>>
>>> thanks for reply and sorry for delayed response.
>>>
>>> set the max-ephone to 2 and phone type is set  but still not working :(
>>>
>>> 1111 is octo number shared by two phone which is used for Cbarge
>>> 2222  is adhoc conference number.
>>>
>>> Is there any bug or workaround. same config was working earlier!
>>>
>>> Regards,
>>> Mritunjay
>>>
>>>
>>> On Sun, Jan 16, 2011 at 8:55 PM, Randall Saborio <[email protected]>wrote:
>>>
>>>> This problem has come up quite a few times on this mailing list.
>>>> You can go to the archives and do a search and you should find the
>>>> solution:
>>>> http://onlinestudylist.com/archives/ccie_voice/
>>>>
>>>>
>>>>
>>>>  On Sun, Jan 16, 2011 at 6:26 AM, Mritunjay Kumar <[email protected]>wrote:
>>>>
>>>>>  Hi All ,
>>>>>
>>>>> Cbarge in SRST is not working
>>>>>
>>>>> here is the config
>>>>>
>>>>> telephony-service
>>>>>  sdspfarm units 2
>>>>>  sdspfarm tag 1 BR1-CNF
>>>>>  no privacy
>>>>>  conference hardware
>>>>>  srst mode auto-provision none
>>>>>  srst dn line-mode dual
>>>>>  max-ephones 20
>>>>>  max-dn 20
>>>>>  ip source-address 14.160.116.40 port 2000
>>>>>  max-conferences 12 gain -6
>>>>>  transfer-system full-consult
>>>>>  create cnf-files version-stamp Jan 01 2002 00:00:00
>>>>> BR1#
>>>>>
>>>>> ephone-template  1
>>>>>  softkeys remote-in-use  CBarge
>>>>> ephone-dn  1  octo-line
>>>>>  number 1111 no-reg primary
>>>>> ephone-dn  2  octo-line
>>>>>  number 2222
>>>>>  conference ad-hoc
>>>>> ephone-dn  3  dual-line
>>>>>  number 3001 no-reg primary
>>>>>  preference 5
>>>>> ephone-dn  4  dual-line
>>>>>  number 3002 no-reg primary
>>>>>  preference 5
>>>>>
>>>>> ephone  1
>>>>>  privacy off
>>>>>  device-security-mode none
>>>>>  mac-address 0026.CBBE.E8C9
>>>>>  ephone-template 1
>>>>>  button  1:3 2:1
>>>>>
>>>>> ephone  2
>>>>>  privacy off
>>>>>  device-security-mode none
>>>>>  mac-address 0026.CBBE.EC4F
>>>>>  ephone-template 1
>>>>>  button  1:4 2:1
>>>>>
>>>>> hardware conf is registered .
>>>>>
>>>>> privacy is disabled under telephony service and in ephone. CME version
>>>>> 7.1
>>>>>
>>>>> any missing config here ?
>>>>>
>>>>> Please suggest.
>>>>>
>>>>>
>>>>> Regards,
>>>>> Mritunjay
>>>>>
>>>>>  _______________________________________________
>>>>> For more information regarding industry leading CCIE Lab training,
>>>>> please visit www.ipexpert.com
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Randall "da ill" Saborio
>>>> CCIE Voice Wannabe #10054675811
>>>>
>>>>
>>>
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>>
>>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to