Hi Steffen, you are right, using TP you can translate calling, but at this point why you change the ANI at TP level and you still use the calling transformation to set subscribe/national/international?Maybe for teho/backup calls in case a call has to be routed to a different gateway? Another consideration, i think that this approach is good in situation where we use Local Route Group with all MGCP gateway and we still need to change ANI on a per call basis cheers Matteo
> From: [email protected] > To: [email protected] > Date: Tue, 18 Jan 2011 23:03:07 +0100 > Subject: Re: [OSL | CCIE_Voice] Calling Party / Called Patry Transformations > dialplan > > Hi Matteo, > > I finally got it: > > You need a separate CSS to translate the Calling party depending on the > called :-): > > e.g. I have a CSS SITEA-NORMALIZE with 3 TP: > > 9[2-9]XXXXXX set calling party Prefix 303 > 9[2-9]XX[2-9]XXXXXX set calling party Prefix 212303 > 9011![0-9#] set calling party Prefix to External Phone > Number Mask > > > for the called Number i can do everything with called party transformations, > e.g. i can prefix a 9 for the H.323 Gateway ... > > > Now i can match for the Calling Party Transformation CSS in the gateway > :-))))) > > > Cheers > > Steffen > > ________________________________________ > Von: Matteo B. [[email protected]] > Gesendet: Dienstag, 18. Januar 2011 22:48 > An: Steffen Lehmann; [email protected] > Betreff: RE: [OSL | CCIE_Voice] Calling Party / Called Patry Transformations > dialplan > > Hi, > > i think that if you are using an H323 gateway you can do it with > translation-profile under dial-peer to modify the ANI. > If you have an mgcp gateway i suppose there is no way to modify the ANI > differentiating it based on the type of the call whithout using RP/RL. > > Matteo > > > > > > From: [email protected] > > To: [email protected] > > Date: Tue, 18 Jan 2011 19:27:55 +0100 > > Subject: [OSL | CCIE_Voice] Calling Party / Called Patry Transformations > > dialplan > > > > Hi all, > > > > im trying to find my way to configure the dialplan with called/calling > > party transformations. > > In the "real world" , i have l always sent the calling number in the same > > format into the pstn, e.g. 5555 will always be 12123035555 isdn national. > > But in the Lab, they want that we send a call to subscriber with CALLING > > 3035555 / a call to a national number should be sent with 12123035555 / > > international should go +12123035555. > > > > How can this be done with calling party transformations without doing > > modifications on any RP/RL? > > > > I have always only the match for 5555 in my calling party. > > > > Any comments are welcome :-) > > > > Kind regards > > > > Steffen > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
