Hi Erwan, Did you follow the instruction on the WB completely? Or you modified the question? The WB is requested a UCME integration with CUC with SIP, not CUE, and user mailbox should be located on CUC not CUE. You need a sip dialpeer to point to CUC with some additional configuration.
So, can confirm this is a UCME + CUE or UCME + CUC ? Thanks Shingei. On Wed, Mar 16, 2011 at 2:30 PM, Shrini <[email protected]> wrote: > uncheck the farend under GK gateway. > > > On 3/15/2011 9:32 PM, Erwan Erwan wrote: > > hi all, > > I am practicing WB lab 6 , that use Gatekeeper for call from HQ (UCM) to > BR-2 (CME) > > - call from HQ-- 5001 to 3001 -- Br-2 and vice versa (thru Gatekeeper) , > 4 digit ext works fine > - call from HQ to CUE pilot point (3600) (thru Gatekeeper) in Br-2 > also work fine > - call to BR-2 (3001) phone from PSTN also hit the CUE and I can leave the > message > > > Issue > ===== > however when I call from HQ to 3001 in BR-2 and I did not pick up the > 3001, it supposed to transfer to CUE (3600) so that I can leave message , > but instead I heard the busy tone. > > * I suspect the BR-2 transcode is not triggering ,however "*sh sccp* " > it said transcode register OK > > > config > ===== > telephony-service > privacy off > sdspfarm units 1 > sdspfarm transcode sessions 3 > sdspfarm tag 1 sc-xcode > voicemail 3600 > > > ephone-dn 1 octo-line > number 3001 no-reg both > call-forward busy 3600 > call-forward noan 3600 timeout 20 > > > ------------------------------------------------------------------------------- > > > Is there any other possibility I need to check ? > > > Thanks > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
