Hi Shingei, Have you set the MVA number under Media Resources in CUCM and is this number in a PT that can be seen by the RDP CSS and possibly also incoming CSS of the MVA GW?
You also need to be able to route to this number from the MVA GW with appropriate dialpeers, if the MVA DN is in the same number range as other internal DN's then you don't need any extra DP's. I assume that you also already have changed the service parameter “Enable Mobile Voice Access” and “Mobile Voice Access Number”. The later should be set to the same as MVA DN under Media Resources. Sincerely Roger Källberg CCIE #26199 (Voice) Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ ________________________________ Från: ShinGei Yong [[email protected]] Skickat: den 23 mars 2011 19:01 Till: George Goglidze; [email protected] Kopia: [email protected] Ämne: Re: [OSL | CCIE_Voice] Vol2 Lab 7 Question 3.2 MVA Mates, I believe quite a number of us hitting this funny issue(if you search thru entire list since early last year) No sure it was caused of softbug or the question itself,unable to get further explanation or solution after all posts. Maybe as Steve suggested, just give it (mobility/ucm service) a lucky reset,then the problem gone. Else,just wait for next unlucky fellow to hit this issue,maybe he'll give us the solution.Who know? Thanks all Shingei. On Thu, Mar 24, 2011 at 1:27 AM, George Goglidze <[email protected]<mailto:[email protected]>> wrote: I had the same problem last time, and I wasn't able to resolve this without having an internal partition in the CSS that I applied on RDP. but then obviously it breaks task 3.1 requierement to show the number: +447976852817 If you find out what the problem is, let us know mate, On Mon, Mar 21, 2011 at 11:33 AM, ShinGei Yong <[email protected]<mailto:[email protected]>> wrote: Hi, I've gone thru the entire OSL list regarding the problem as i'm facing, but unfortunately didn't manage to get the answer. MVA has configured on BR2 gw,the remote destination manage to call in to MVA# and authenticated successfully. When press option#1, which make a call to either internal or external, it just failed. RDP CSS:css-snr-3002/pt-snr-3002 Rerouting CSS:css-br2-unrestricted/pt-uk-emer,pt-uk-national,pt-uk-international Mobility Service Parameters: Partial Match 10Digits, RDP + Line CSS ** As per question required,we need xlation rule to display mobile ANI instead of internal DN ** Translation Pattern XXXX/pt-snr-3002 CSS:css-phones/pt-phones Use Calling Party EPNM: Checked 1002/pt-phones 5002/pt-phones I can call up the internal extension [15]002, IF i include the pt-phones into RDP CSS,but that will caused ANI display become internal DN instead of mobile ANI because of closest match. Any idea why internal calling doesn't work? Thanks Shingei _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
