Hi ShinGei, Thanks for much for the reply, I guess I must be overlooked, the BR2 was registered to the wrong zone! I'm going to try it on my lab tomorrow.
Again thanks! Regards, Alex On Sun, Apr 10, 2011 at 2:18 AM, ShinGei Yong <shingei.y...@gmail.com> wrote: > Hi Alex@ncs, > > While observing your config,i noticed that you've 3 zone defined under GK, > which are UCM,UCME& VIA. > > If i remember correctly,ur R3 which is ur CME site should registered to UCME > instead of zone VIA right? > Also, what is your region configuration on that pointed to GK? > > Thanks > Shingei. > > On Sun, Apr 10, 2011 at 1:42 AM, Alex Goh <ncsalex....@gmail.com> wrote: >> >> Hi Guys, >> >> I'm trying to get the solutions for question 4.2 to work, but >> apparently I'm missing something and hope someone can help. >> I've search thru the list but doesn't really found a solution work for my >> case. >> >> The issue I've encounter are when HQ phone 5001 calling BR2 phone >> 3003, 3003 ring, but when i tried to answered, the call drop. >> I know it might be related to codec issue, but I've my HQ-RTR >> configured with Xcoder which it is up and active but the call >> still failing. I also did have the trunk in cucm "Wait for Far End >> H.245 Terminal Capability Set" unchecked. >> >> once things I notice is that, my call doesn't seems get re-originated >> on the cube router to BR2 router, what I see during ringing state >> my "show gatekeeper endpoint" show the call is directly from the CUCM >> to BR2 It is only 2 call legs instead of 4 (see below). >> >> hm, what have I missed? >> >> Some Info: >> HQ Router (R1) >> >> interface Loopback0 >> ip address 172.1.254.1 255.255.255.255 >> h323-gateway voip interface >> h323-gateway voip id VIA ipaddr 172.1.254.1 1719 >> h323-gateway voip h323-id R1 >> h323-gateway voip bind srcaddr 172.1.254.1 >> >> gatekeeper >> zone local UCM 172.1.254.1 >> zone local UCME outvia VIA >> zone local VIA >> zone prefix UCME 3... >> gw-type-prefix 1#* default-technology >> no shutdown >> >> dial-peer voice 30 voip >> destination-pattern 3... >> session target ras >> codec g711ulaw >> ! >> dial-peer voice 31 voip >> incoming called-number 3... >> >> Total number of active calls = 1. >> GATEKEEPER CALL INFO >> ==================== >> LocalCallID Age(secs) BW >> 511-32797 6 16(Kbps) >> Endpt(s): Alias E.164Addr >> src EP: gk_trunk_2 5001 >> CallSignalAddr Port RASSignalAddr Port >> 172.1.10.20 38233 172.1.10.20 32795 >> Endpt(s): Alias E.164Addr >> dst EP: R3 3003 >> CallSignalAddr Port RASSignalAddr Port >> 172.3.254.1 1720 172.3.254.1 49395 >> >> GATEKEEPER ENDPOINT REGISTRATION >> ================================ >> CallSignalAddr Port RASSignalAddr Port Zone Name Type >> Flags >> --------------- ----- --------------- ----- --------- ---- >> ----- >> 172.1.10.10 47142 172.1.10.10 32838 UCM VOIP-GW >> H323-ID: gk_trunk_1 >> Voice Capacity Max.= Avail.= Current.= 0 >> 172.1.10.20 38233 172.1.10.20 32795 UCM VOIP-GW >> H323-ID: gk_trunk_2 >> Voice Capacity Max.= Avail.= Current.= 0 >> 172.1.254.1 1720 172.1.254.2 56974 VIA H323-GW >> H323-ID: R1 >> Voice Capacity Max.= Avail.= Current.= 0 >> 172.3.254.1 1720 172.3.254.1 49395 VIA H323-GW >> H323-ID: R3 >> Voice Capacity Max.= Avail.= Current.= 0 >> Total number of active registrations = 4 >> >> R1(config-if)#do sh gatek gw >> GATEWAY TYPE PREFIX TABLE >> ========================= >> Prefix: 1#* (Default gateway-technology) >> Zone UCM master gateway list: >> 172.1.10.20:38233 gk_trunk_2 >> 172.1.10.10:47142 gk_trunk_1 >> Zone VIA master gateway list: >> 172.3.254.1:1720 R3 >> 172.1.254.2:1720 R1 >> >> BR2 Router (R2) >> >> interface Loopback0 >> ip address 172.3.254.1 255.255.255.255 >> h323-gateway voip interface >> h323-gateway voip id VIA ipaddr 172.1.254.1 1719 >> h323-gateway voip h323-id R3 >> h323-gateway voip tech-prefix 1# >> h323-gateway voip bind srcaddr 172.3.254.1 >> >> dial-peer voice 10 voip >> incoming called-number 3... >> dtmf-relay rtp-nte >> codec g711ulaw >> ! >> >> CUCM Trunk >> the trunk was assign a separate DP with a region that using G729 when >> calling HQ and BR2. >> >> >> >> Regards, >> Alex >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
