Hi all, I'm following up the same question that i posted last month, regarding the PSTN call diversion to BR2 CUE Voicemail during SRST.I was got confuse by the question,but looking at it to question & PGuide, i think my understanding is correct.
The question is asking, Ensure that the caller from PSTN who have dialed BR2 phone can be routed to Voicemail when there is a WAN outage at the BR2 site. In PGuide, the BR2 DN has CFUR external checked.So my understanding is that,when PSTN caller call BR2 phone,it should be routed to voicemail immediately,which CUE is locally located. My question is,how do achieve that PSTN caller enter Voicemail immediately without ringing the BR2 phone but allowing call from HQ/BR1 ring the destination and enter voicemail when CFNA or CFB. Anyone complete this section successfully?May share the idea? Shingei On Tue, Mar 8, 2011 at 11:16 PM, Rogers Ochieng <rogersochi...@gmail.com>wrote: > Looking at that question the wording there does not specify that you need > to send calls immediately to voicemail but that PSTN calls to BR2 can be > routed to VM, it doesn't say at what state so to send VM so PSTN calls to > BR2 busy and no answer states should meet the requirement. > > > On 8 March 2011 18:05, ShinGei Yong <shingei.y...@gmail.com> wrote: > >> Hi Rogers, >> >> Yes, and again, as stated below, i'm able to achieved CFB and CFNA during >> SRST, >> so in other words,the required dial-peer and setting to route call to CUE >> is already done,right? >> And HQ/BR1 phone is able to call BR2 phone via PSTN during SRST. >> >> Maybe put the question in this way: >> >> PSTN caller which originate from HQ/BR1, ring the destination during >> SRST.(I've done this) >> PSTN caller which originate from PSTN, to Voicemail without ringing BR2 >> phones during SRST >> >> Is the second requirement possible? >> >> Shingei. >> >> >> >> On Tue, Mar 8, 2011 at 10:26 PM, Rogers Ochieng >> <rogersochi...@gmail.com>wrote: >> >>> AS you've stated you are using CUE which in normal operations you've >>> integrated using jtapi CUE integration, i assuem the CUE module is on the >>> BR2 router. So for SRST create a voip dial-peer using sip protocol and codec >>> g711ulaw, dtmf sip-notify, to route calls to CUE and set CFB and CFNA, setup >>> CUE sip settings. For HQ and BR1 to access BR2 setup CFUR >>> >>> On 8 March 2011 16:05, ShinGei Yong <shingei.y...@gmail.com> wrote: >>> >>>> Hi Roger, >>>> >>>> As stated below, i'm able to achieved that PSTN caller routed to VM when >>>> CFB and CFNA. >>>> Alsothere's no CUC in this lab. >>>> >>>> how to achieve that PSTN caller will be route to VM while allowing HQ or >>>> BR1 ring the destination in SRST site? >>>> TIA >>>> Shingei >>>> >>>> 2011/3/8 Roger Källberg <roger.kallb...@cygate.se> >>>> >>>> You need to setup CFB & CFNA in an SRST situation, so that it sends >>>>> the call over PSTN to CUC VM. >>>>> >>>>> Sincerely >>>>> >>>>> *Roger Källberg* >>>>> CCIE #26199 (Voice) >>>>> Consultant >>>>> Cygate AB >>>>> Eric Perssons väg 21, SE-217 62 MALMÖ >>>>> >>>>> ------------------------------ >>>>> *Från:* ShinGei Yong [shingei.y...@gmail.com] >>>>> *Skickat:* den 8 mars 2011 11:00 >>>>> *Till:* ccie_voice@onlinestudylist.com >>>>> *Ämne:* [OSL | CCIE_Voice] Vol2 Lab 5 Question 4.2 CUE SRST >>>>> >>>>> Hi, >>>>> >>>>> The question stated,caller from PSTN "CAN BE" routed to VM when there's >>>>> WAN outage at BR2. >>>>> Internal caller from HQ or BR1 must be able to reach BR2 phone and >>>>> forward to VM if no answer. >>>>> >>>>> To me,there are two meaning of the sentense >>>>> >>>>> 1. PSTN caller routed to VM immediately when there's WAN outage at BR2, >>>>> >>>>> >>>>> 2. PSTN caller routed to VM when CFB or CFNA. >>>>> >>>>> What confuse me is that,how to achieve that the PSTN caller routed to >>>>> VM immediately >>>>> when there's a WAN outage at BR2?I'm able to achieved that PSTN caller >>>>> router to VM >>>>> when CFB and CFNA. >>>>> >>>>> In proctor guide, Forward Unregisterd Int and External been >>>>> checked(VM),but how the UCM instruct PSTN call >>>>> to VM?The PSTN call will hitting the BR2 GW directly due to SRST. >>>>> >>>>> Am i thinking of too much? >>>>> >>>>> Shingei >>>>> >>>> >>>> >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, >>>> please visit www.ipexpert.com >>>> >>>> >>> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
