Hello Experts, I was wondering if one of you could give me an explanation on this task since I am a bit lost:
Workbook 2 Lab 2 Task 6.3: The task says: Ensure that the SRR scheduler for phones at the HQ switch shapes Q2 to 50% of the interface bandwidth. On the Solution Guide, it says: HQ-3750(config)#interface FastEthernet 1/0/2 HQ-3750(config-if)#srr-queue bandwidth shape 10 50 20 20 After I did that I got the following output: HQ-3750#show mls qos interface fastEthernet 1/0/2 queueing FastEthernet1/0/2 Egress Priority Queue : enabled Shaped queue weights (absolute) : 10 50 20 20 Shared queue weights : 10 10 60 20 The port bandwidth limit : 100 (Operational Bandwidth:100.0) The port is mapped to qset : 2 However, I then check CCO and found the following: "The bandwidth weight for queue 1 is 1/8, which is 12.5 percent: Switch(config)# interface gigabitethernet2/0/1 Switch(config-if)# srr-queue bandwidth shape 8 0 0 0" http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_50_se/configuration/guide/swqos.html#wp1163879 The question is: Why is it configured on the solution as "10 50 20 20"? Shouldn't it be configured as "0 2 0 0" since 1/2 equals 0.5? Looking forward to your response. -Pablo Meneses.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
