I have my own voice lab hardware and am having a problem getting frame relay piece to work. My PSTN/Frame Relay switch is a 3725 with VWIC-2MFT-T1/E1 modules and BR1, BR2, & HQ are 2800's with VWIC-2MFT-T1/E1 modules.
I have downloaded and installed the initial router config's from the member download area and loaded them on my hardware. I have T1 crossover plugs connected to the 3725 and from there I have cat5 cables going out to the 2800's. The physical interfaces are line up and protocol down all routers. On the 2800's the physical interface is up and protocol is down. The frame relay sub-interfaces on the 2800's are down and down. I have made my own T1 crossover cables but the result is the same. I have verified the configurations to make sure they match the initial configurations that I down loaded and they do. Can someone point me in the right direction? Thanks.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
